Cooking automatically after defrosting

Changing or adding defrost time

You can change the defrosting time while the QUICK DEFROST Cycle is operating:

1.Touch QUICK DEFROST.

2.Touch numbers for the new time.

3.Touch START.

Any new time setting made while QUICK DEFROST is operating will continue the defrosting only at 20% of full Cook Power.

The best time to change the setting is near the end of the QUICK DEFROST Cycle.

1.Open the door.

2.Check the food with long-tined fork; if center area is hard frozen, set additional time. Remember that standing time will further defrost the food.

3.Close the door and touch STARTto continue the cycle if no additional time is needed.

4.Or, touch in new instructions if additional time is needed.

The controls can be set so the microwave oven goes automatically from defrosting to the Cook Cycle you have touched in.

1.Put frozen food in the oven and close the door.

2.Touch QUICK DEFROST.

3.Touch Number Pads for defrosting time you want.

The QUICK DEFROST Signal Light will come on and the Display will show four 0’s.

The Display will show the numbers you touched in the order you touched them. This example shows 2 minutes. 30 seconds.

The COOK Signal Light will come on and the Display will show four 0’s.

4.Touch Cook.

The Display will show the numbers you touched in the order you touched them. This example shows 3 minutes, 25 seconds.

5.Touch Number Pads for the cooking time you want.