Whirlpool RB262PXY The electronic clock/oven controls, Display/clock, Command pads, Set Knob

The electronic clock/oven controls

There are three parts in the clock/oven control section:

-The display

-The command pads -The Set Knob

Instructions for the oven control are covered on the following pages. Read them carefully.

When you first plug in the range, the last time of day set will show in the display. If, after you set the clock (page 9) the display again shows the last time of day set, your electricity was off for a while. Reset the clock.

Display/clock

When you are not using the oven, this is an accurate clock. When using the oven or Minute Timer, the display will show the time, temperature settings and what command pads have been pressed.

When showing the time of day, the display will show the hour and minutes.

When using the Minute Timer, the display shows minutes and seconds in the following sequence:

l For settings from O-l minute 55 seconds, the display will increase in 5-second increments and count down each second.

l For settings from 2-10 minutes, the display will increase in l&second increments and count down each second.

l For settings from lo-60 minutes, the display will increase in 1-minute increments and count down each second.

lFor settings from l-2 hours, the display will increase in 5-minute increments and count down each minute.

lFor settings from 2 hours-9 hours 50 minutes, the display will increase in lo-minute incre- ments and count down each minute.

When using Cook Time and/or Stop Time, the display shows hours and minutes.

Command pads

The command pads tell the oven what to do and in what order. A few examples:

-Clock/Set tells the oven you are going to set the clock.

-Off/Clear tells the oven to turn off.

Each command pad (except Off/Clear) has its own indicator. The indicator comes on when you touch the command pad.

Set Knob

Once you’ve pushed a command pad to tell the oven what you want it to do, you’ll use the Set Knob to set a temperature or time. Turning the Set Knob clockwise increases the number on the display. Turning the Set Knob counterclockwise decreases the number on the display.