If You Need Assistance
Or Service
This section is designed to help you save the cost of a service call.
1. Before calling for assistance . . .
Performance problems often result from little things you can find and fix without tools of any kind. Plea%? check the chart below for problems you can fix. It could save you the cost of a service Call
PROBLEM
Nothing will operate
The oven will not operate
The surface units will not operate
Control knob(s) will not turn
POSSIBLE CAUSE
The power cord is not plugged into a live circuit with proper voltage.
A household fuse has blown or a circuit breaker has tripped.
The Oven Selector is not turned to BAKE or BROIL.
A delayed start time has been set.
The Oven Temperature Control Knob is not turned to a tempera- ture setting.
The automatic MEALTIMER’” clock is not set correctly.
The Stop or Start Time Knobs for the automatic MEALTIMERTM clock are not set at the correct time of day.
A household fuse has blown or a circuit breaker has tripped.
Surface units are not plugged in all the way.
The control knobs are not being set correctly.
You are not pushing in before turning.
SOLUTION
Plug the power cord into a live circuit with proper voltage. (See Installation Instructions.)
Replace household fuse or reset circuit breaker.
Turn the Oven Selector to the desired setting.
Wait for the start time to be reached.
Turn the Oven Temperature Control Knob to a temperature setting.
Set the MEALTIMER clock correctly. (See “Usingthe automatic MEALTIMER’” clock” on page 16.)
If a delay start or stop is not desired, the Stop and Start Time Knobs must be turned to the correct time of day. Turn knobs till they pop out.
Replace household fuse or reset circuit breaker.
Plug surface units in all the way. (See “Replacing” on page 23.)
Push control knobs in before turning to a setting.
Push control knob(s) in before turning to a setting.
continued on next page
29
