PROBLEM
Cooking results are not what you expected
The display is showing “PF”
“F”followed by a number shows on the display
CAUSE
l The range is not level. (See Installation Instructions.)
l The oven temperature seems too low or too high. See “Adjusting the oven temperature control” on page 17 to adjust oven temperature.
l You did not preheat the oven before baking (if called for in recipe).
l The recipe you are using may need to be altered to improve the taste or appearance of the food.
l You are using a pan that is not the correct type or size. Refer to a reliable cookbook or recipe for recommended pan type and size.
l There is not enough air space around pan when baking. Allow 1% to 2 inches
l The cooking utensil is too large or too small for the surface unit being used. Pan should be the same size or slightly larger than the surface unit being used.
l There has been a power failure. Reset the clock. (See page 13.)
l The electronic control or temperature sensor has failed. Call for service. (See Step 2 on page 31.)
If none of these items was causing your problem, see “Requesting Assistance or Service” on page 31.
30
