Whirlpool RF327PXP manual Using the surface units, Surface Unit Indicators, Signal Light

OVEN TEMPERATURECONTROL OVEN SIGNAL LIGHT OVEN SELECTOR

&EN LIGHT SWITCH	RIGHT REAR/-	RIGHT FRONT’
	CONTROL KNOB	CONTROL KNOB

Using the surface units

Control knobs must be pushed in before fuming them to a setting. They can be set anywhere between HI and OFF.

Surface Unit Indicators

The solid dot in the surface unit indicator shows which surface unit is turned on by that knob.

Signal Light

One of the signal lights will glow when a surface unit is on.

Solid Element

Surface Units

Solid element surface units are made of heavy cast-iron to provide even cooking. Each surface unit has a built-in protective limiter. The limiter senses

uneven cooking temperatures and automatically reduces the heat setting. The limiter will sense uneven heat when a pan boils dry, when a pan does not have a flat bottom, or when a pan is removed and the surface unit is left on.

Solid elements hold heat longer than conventional surface units. For best cooking results, use a high setting for only a very short period of time. Then use a lower setting to complete the cooking. You may want to turn the solid element OFF a few minutes before you are finished cooking.

CALCCION:Collddem~dayhottoral~Wme.Donot~lheHl~ng

for long perloda of ilme or have pans on hot elemenh when oooklng k dona.Bumedfoodanddamaaatolheoookwanoouldrestdf.