3.Hold the surface unit as level as possible with the terminal just started into the receptade. Push the surface unit terminal into the receptacle.
4.When terminal is pushed into the receptade as far as it will go, push down the edge of the surface unit opposite the receptacle. The element hokfdown clip will keep the surface unit from moving around.
NOTE: Refledor howls reflect heat back to the utensils on the surface units. They also help catch spills. When they are kept clean, they reflect heat better and look new longer.
lf a reflector howl gets discolored, some of the utensils may not be flat enough, or some may be too large for the surface unit. In either case, some of the heat that’s meant to go into or around a utensil goes down and heats the reflector howl. This extra heat can discolor it.
20