Whirlpool RF361 BXD Adjusting the oven temperature control, Press and hold Bake pad for Seconds

Adjusting the oven temperature control

Although your new oven is properly adjusted to provide accurate temperatures, it may cook faster or slower than your old oven.

If, after using the oven for a period of time, you are not satisfied with the baking/roasting results, you can change the offset tempera- ture by following these steps:

1. Press and hold Bake pad for

4 seconds.

The display will show the current offset temperature, for example “O”,if you have not previously adjusted the temperature.

2. Set new offset temperature.

Press A to raise the temperature or V to lower the temperature in 10°F amounts. You can set the temperature change to as low as -30°F or as high as +3O”F. A minus (-) sign will appear before the number when decreasing the temperature setting to show the oven will be cooler by the displayed amount. There is no sign in front of the number when increasing

the temperature setting.

3. Enter the adjustment.

How to determine the amount

of adjustment needed

The chart at the right tells you how much to adjust the offset temperature to get the desired cooking results. You can determine cooking results by the amount of browning, moistness, and rising times for baked foods.

NOTE: DO NOT measure oven temperature with a thermometer. Opening the oven door will lower the oven temperature and give you an inaccurate reading. Also, the ther- mometer temperature reading will change as your oven cycles.

PRESS YOU SEE 9”’

(factory setting of “0”)

PRESS YOU SEE FN

PRESS YOU SEE

(a blank dlsplay)

	ADJUST BY
	THIS NUMBER
TO MAKE	OF DEGREES
FOOD...	(FAHRENHEIT)

A little	more	done	t10
Moderately		more done	t20
Much	more	done	t30

A little	less	done	-10
Moderately		less done	-20
Much	less	done	-30

15