Whirlpool RF385PCV manual Setting the Controls

Setting the Controls

Be sure the kitchen is ventilated during the Self-Cleaning cycle. This wlii help normal smoke and heat to disappear from the room as qulckiy as possible.

1. Set the Oven Selector and Oven Temperature Control on CLEAN. The “on” Signal Light will come on.

3.Push in and release the Self-Clean Button. A 3-hour Self-Cleaning cycle will be set automatically.

The Display will count down the time in minutes. The Auto Oven Symbol, Self-Clean and “heating” Signal Lights will come on.

If a cleaning cycle other than 3 hours is desired, push in and hold the Bake Hours Button and turn the Set Knob to the new time up to 4 hours.

l Use 2 hours for light soil.

l Use 3-4 hours for moderate to heavy soil.

I

2.Move the Lock Lever ail the way to the right-theClean position.

4.The “locked” Signal Light will come on when the oven tempera- ture exceeds normal baking tem- peratures. The Lock Lever must not be moved and the door can’t be opened when the light is on. if you want to see Stop lime of the Self-Cleaning cycle, push the Stop Time Button. Push the Self- Clean Button to see cleaning time again.

NOTE: The Bake Hours and Stop Time Signal lights will flash dur- ing the entire Self-Cleaning cycle.

5. After the cleaning cycle is com- pleted, the Auto Oven Symbol

and Self-Clean Signal Light will go off. The Display will show the time of day. When the “locked” Signal Light goes off, move the Lock Lever back to the left. Do not force it. Wait until it will move easily.

23