Whirlpool RGC3622B, REP3622B, REC3622B Using dryer fabric softeners, Saving energy, Vacation care

Using dryer fabric softeners

Dryer fabric softeners are recommended for reducing static cling (static can also be re- duced by not overdryiig) and for softening fabrics. Always follow package instructions carefully.

lPut fabric softener sheet on top of the load beforestarUngtbedryu.Donotadda

fabric softener sheet atter the cyde has started. Instant heat can cause the fabric softener to spot fabrics.

l

l

Clear, grease-like spots can result from the fabric softener sheet becoming tangled in an item during tumbling. If fabric softener causes a stain, wet the stain and rub with liquid detergent or bar soap, rewash.

Some fabric softeners can clog the lint screen and slow drying. Use fabric softeners labeled as dryer safe.

Saving energy

lDry only full loads without overdrying.

l Avoid overloading dryer, adding wet items to a partly dried load, or opening the door unnecessarily.

lPlan your laundry to dry one load after another. A warm dryer shortens drying tfme.

Vacation care

1.Unplug power supply cord or turn off electrical power supply.

2.Clean lint screen.

Voltage requirements

lModel REC3622B operates on 240 or 206 volt household current.

l Models REP3622B and RGC3622B operate on 120 volt household current.

NOTE: Electric dryers using 206 or 120 volts require longer drying times than dryers using 240 volts.

l Shorten d@ig times by exhausting dryer properly and cleaning exhaust duct as needed.

-Keep the lint screen clean.

-Use your dryer in a room where room air temperature is above 45°F (7°C).

-Sort loads by fabric weight and type.

15