Whirlpool RJE-960P, RJE-963PP manual Using the surface unit controls

PUSH IN and turn until the setting shows in the window.

To bake, turn the Oven Selector Knob to BAKE.

.

Using the surface unit controls

The Surface Unit Control Knobs must be pushed in before turning them This helps avoid turning them on accidentally when wiping off the Control Panel. And it helps keep small children from turning them on. You must push in on them.. .then turn until the setting you want shows in the window.

The four Surface Unit Controls and Signal Lights are arranged In the same order as the Surface Units. For example. to turn on the right front Surface Unit [ . 1, push in and turn the lower right Surface Unit Control [ . 1 The lower right Signal Light [ . 1will glow.

The knob may be set anywhere between “HI” and “OFF” As you use your surface units. you frill get used to the settings that match your pots. pans and favorite foods the best.

As a guide. the setting should cook at about the following heats: HI -To start most foods cooking. To bring water to a boil.

MED-HI - To hold a rapid boil: to fry pancakes or chicken.

MED - 31 make gravy. puddings and icings: to cook large quan- tlties of vegetables.

MED-LO - To keep food cooking after starting it at a higher setting. LO - To keep food warm until ready to serve. You can set the

heat higher or lower within the “LO” range to help keep food at the temperature you want

The Signal Light will glow whenever a Surface Unit is on. Be sure this light is off when you have finished cooking.

Using the Oven Controls

To bake. broil or time bake in the upper oven. set the Upper Oven Selector and the Upper Oven Temperature Control Knob. To bake. broil or time bake in the lower oven. set the Lower Oven Selector and the Lower Oven Temperature Control Knob.

Baking:

First---Folloiv tht> directions on page 8 for “Positioning Oven Racks ”

Second-Turn the O~W-~Selector Knob to “BAKE ”

Third -Xirn the O\~en Temperature Control Knob to the baking temperature you uant The Oven Signal Light will glow while the oven is heating When this light goes off, the oven has heated to the temperature you set

Fourth-Place food in oven The heating elements turn off and on during baking to keep the oven at the temperature you set. The Oven Signal Light will glow when the heating elements are on

Fifth-When the baking is done, turn both the Oven Temperature and Oven Selector Knobs to “OFF”

NOTE: Do not lock the oven door during baking If you do. you may not be able to unlock It until tht oven has cooled.