Whirlpool RJM 7450 manual Usingthe MEALSENSOR* TemperatureProbe

Models: RJM 7450

1 16
Download 16 pages 43.1 Kb
Page 9
Image 9

SomeDo’sDon’& andHints (cont’d)

5.Popcorn should be made only in a popper designed for microwave use. Follow instructions received with the popper. The results are the responsibility of the popcorn popper manufacturer.

6.Liquids heated in certain containers may overheat and flash into vapor. Water can splash out of the container and make a loud noise. This is not dangerous and will not harm the oven. You may wish to avoid using such containers for heating liquids again.

7.DO NOT OVERCOOK POTATOES. At the end of the recommended cooking time, the potatoes should be slightly firm. Wrap potatoes in foil and set aside for five minutes. Potatoes will finish cooking while standing.

Some potato varieties may cook faster than others. Overcooking may result in poor flavor and texture and potatoes may scorch or flame.

8.Do not store utensils in the oven.

9.Use hot pads.. some utensils can be hot.

10.Do not block the vents. Normal exhaust from cooking is vented out the top and back on RJM 7450. Depending on the food, exhaust may be hot.

11.The inner door liner may appear wavy after the microwave oven has been operated for a long time. This is normal.

Usingthe MEALSENSOR* TemperatureProbe

The temperature probe helps you cook foods to the temperature you set. The microwave oven turns off automatically when the probe senses the temperature you set.

When you use the probe, you do not need to set a time. The recipes include temperature settings.

To use the Probe:

PLUG

1. Put the temperature sensor end of the MEAL SENSOR tempera- ture probe into the food you are heating or cooking. It is important to place % of the probe in the center of the thickest part of the food. The oven may turn off too fast or too slow when using the probe if the probe is placed near a bone. in fat, in an air pocket or away from the center of the food. It may be rjecessary to relocate the probe and restart the oven.

2. Place the food and the probe into the microwave oven. Plug the probe into the side of the oven. Close the door.

3.Set Cook Power, if desired.

4.Turn the MEAL SENSOR control to the final cooking temperature.

5.Push Start button. The Probe indicator and the On indicator will glow.

When the probe senses the final temperature, a buzzer will sound, and the oven will turn off.

Remove the food and the probe from the microwave oven.

l Tm k.

Page 9
Image 9
Whirlpool RJM 7450 manual Usingthe MEALSENSOR* TemperatureProbe