3.Hold the surface unit as level as possible with the terminal just started into the receptacle.
4.Push the surface unit terminal into the receptacle. When the terminal is pushed into the receptacle as far as it will go, the surface unit will fit into the reflector bowl
CAUTION: Reflector bowls reflect heat back to the utensils on the surface units. They also help catch spills. When they are kept clean, they reflect heat better and look new longer.
If a reflector bowl gets discolored, some of the utensils may not be flat enough, or some may be too large for the surface unit. In either case, some of the heat that’s meant to go into or around a utensil goes down and heats the reflector bowl. This extra heat can discolor It. See “CookIng Guide” for further Information.
Lift-Up Cooktop
1.Lift front of cooktop at center and
2.Carefully lower the cooktop onto the support rod.
3.Wipe with warm soapy water. Use soapy
CAUTION: Do not drop the cooktop or let it bump the upper oven when Ilfflng. Damage can result to the porcelain and the cooktop frame.
