Olivetti ECR 6900 manual Discount or Add-on Amounts +/- Key, No Sales Receipt Key Status

To program an in-store price barcode:

1.Control lock key position: PRG.

2.Enter your in-store code [1 to 10] that identifies the configuration of the barcode that you are programming.

3. Press .

4.Enter the code type [0 or 1].

5.Enter the max. 3-digit country-specific code prefix [000 to 999]. Three digits must alwas be used; for example, to define a prefix of 24, enter [024].

6. Enter the number of digits [1 to 3] that the country- specific code prefix consists of. For example, if your code prefix is 24, enter [2].

7. Enter the number of digits [1 to 8] that the price incorportated in the bar code consists of.

8. Define whether to use a price check digit or not.

9. Enter the currency identifier [1 to 4].

10. Press.

No Sales Receipt Key Status

Depending on how it is programmed, the key can be

activated in MGR mode, or in both MGR and REG modes, to open the cash drawer without the need to register a sales amount, or when changing money for a non-sales code.

The 6-digit Status consists of flags for [Drawer Open], [Register Mode], [Print Receipt], [Print Receipt Header], [Input Electronic Journal] and [Consecutive Receipt Number Update]. Defaults are indicated in bold.

Drawer OpenRegister Mode

0 = Enabled	0 = REG and MGR
1 = Disabled	1 = MGR only
Print Receipt	Print Receipt Header
0 = Enabled	0 = Enabled
1 = Disabled	1 = Disabled
Input E.J.	Consec. Rec. No. Update
0 = Enabled	0 = Enabled
1 = Disabled	1 = Disabled
To program the	key:

1. Control lock key position: PRG.

2. Type and press .

3.Enter the [6-digit status].

4.Press.

Example: Define a status enabling drawer open in MGR mode only, receipt printing with consecutive numbers, and no header or electronic journal input.

Type/Press:

6-digit No sales receipt key status

Switch to key status definition mode

PO and RA Key Status Programming

For these keys you can specify a 2-digit Status consisting of a [HDLO] and a [Print Receipt Header] flag.

High Digit Lock Out	Print Receipt Header
0 = No HDLO	0 = Enabled
1 = 0.01 - 0.09	1 = Disabled
2 = 0.01 - 0.99
3 = 0.01 - 9.99
4 = 0.01 - 99.99
5 = 0.01 - 999.99
6 = 0.01 - 9999.99
To program the	key:

1. Control lock key position: PRG.

2. Press .

3.Enter the [2-digit status].

4.Press .

To program the key:

1. Control lock key position: PRG.

2. Press .

3.Enter the [2-digit status].

4.Press .

Example: For the key, define a HDLO of 4 (99.99)

with no receipt header printing.

Type/Press:

2-digit status

Discount or Add-on Amounts (+/- Key)

A High Digit Lock Out (HDLO) and a positive or negative

status can be assigned to the key. You can limit the

number of digits, i.e. the maximum value of a minus or plus key operation, from 1 to 6 digits. This makes sure that amounts do not exceed a maximum value. You can also assign a discount (-) or add-on (+) status to this key so that specific amounts are discounted or added on.

Make your selections for this feature from the following options (defaults in bold):

High Digit Lock Out		Discount or Add-on
0 = No HDLO		0 = Negative (discount)
1	= 0.01 - 0.09	1 = Positive (add-on)
2	= 0.01 - 0.99
3 = 0.01 - 9.99
4	= 0.01 - 99.99
5 = 0.01 - 999.99
6 = 0.01 - 9999.99

16