Olivetti ECR 6900 manual Manager Passwords, Using the Cash Register in a Password Protected Mode

Example: Program Alex as the name of Clerk number 1 using the CAPS character table.

Type/Press:

Switch to	clerk	name
definition	mode		Clerk name entry

Exit

Confirm entered clerk name

Manager Passwords

You can define two different manager passwords, one to prevent unauthorized access to the machine's PRG and Z modes and one to prevent unauthorized access to the X mode.

Since the management report taken in the Z mode resets transaction totals to zero, a management password pre- vents accidental resetting of these totals by unauthorized personnel. The X mode password safeguards the confiden- tiality of transaction report data.

Defining a PRG and Z Mode Manager Password

1.Control lock key position: PRG.

2.Press and then press

.

3. Type your 4-digit manager password and press .

NOTE: If you define a manager password of 0000, the password security protection feature will not work.

Example: Define manager password 9876 for the PRG and Z modes.

Switch to PRG and Z password definition mode

Type/Press:

Password

Defining an X Mode Manager Password

1.Control lock key position: PRG.

2.Press and then press

.

3. Type your 4-digit manager password and press .

NOTE: If you define a manager password of 0000, the password security protection feature will not work.

Example: Define manager password 6789 for the X mode.

Switch to X mode password definition mode

Type/Press:

Password

Clearing the PRG, Z and X Manager Passwords

To clear a PRG, Z or X mode password, program password by following the instructions of

sections "Defining a PRG and Z Mode Manager Password" and "Defining an X Mode Manager Password".

Using the Cash Register in a Password Protected Mode

If a manager password was defined to protect unauthorized access to the PRG, Z and X modes, proceed as follows to enter the specific password:

1.Control lock key position: PRG.

2.Type the specific 4-digit password.

3.Press .

Training Mode

Training mode allows you to use the cash register to perform true sales transactions for learning purposes. All transac- tions performed in this mode are not recorded in the manage- ment financial reports and sales receipts are not numbered consecutively: four asterisks are printed instead.

When the cash register is switched to training mode, all training transactions can be performed in REG and MGR modes.

You can also print a detailed training report to keep track of the transactions performed in this mode. See "Training Report" for details.

To use the training facility in PRG mode:

1. Control lock key position: PRG.

2. Press . A

line appears on the display to indicate that the cash register is in Training Mode.

3.Turn the control lock key to REG or MGR to perform training sales transactions.

To exit the training facility in PRG mode:

1. Control lock key position: PRG.

2. Press .

To access the training facility from REG mode, enter the password:

1.Control lock key position: REG.

2.Type your [4-digit password] for training mode and

press .

14