Surface Burners
-
Lift up the cooktop, following the instructis 1son page1 1.
Wipe oft surface burners with warm soapy water and a soft cloth after each use.
Occasionally check surface burner flames for size and shape as shown. If flames do not burn properly, you may need to remove the surface burners for cleaning (see pagel5), or call a qualified technician for burner adjustments.
To adjust the LO settings on the control knobs:
1.Turn on the surface burners, then set the controls on LO,
2.WIthout changing the burner settlngs, remove the control knobs.
3.Firmly grasp the control stem and insert a small bladed screwdriver into the end of the stem. Turn the screwdriver in either direction until the flame height is Yain (38 cm) or lower in size. Flame must be large enough to malntaln a STABLEFLAME on all burner pork.
NEVERADJUST THEFLAME SIZE AT THEMEDIUM SETTING.
The Upper Oven Rack Guides
Removing the upper oven rack, rack guides and burner cover will help make it easier to clean the upper oven.
a I
REVERSETHEPROCEDURE TO REPLACEBURNERCOVER, RACK GUIDES ,* AND RACK.
