Whirlpool SF302BSE Removing The Oven Door, To remove, Lift-Upcooktop And Surface Burners Cont

Models: SF302BSE SF3000SE

1 28
Download 28 pages 38.73 Kb
Page 19
Image 19
LIFT-UP COOKTOP AND SURFACE BURNERS (CONT.)

CARING FOR YOUR RANGE

LIFT-UP COOKTOP AND SURFACE BURNERS (CONT.)

7. To lower the cooktop, lift the cooktop from both

8. Replace the surface burner grates.

sides while pressing the

 

support rods back to

 

unlock them. Lower the

 

cooktop into place.

 

REMOVING THE OVEN DOOR

For normal use of your range, you do not need to

Insert nail or

remove the door. However, if you have to remove

screw here

the door follow the instructions in this section.

 

Oven door

Range

Hinge hanger

To remove:

1.Open the door about halfway. Insert nails or screws into both hinge hangers. Do not remove them while the door is removed

from the range.

3.Rotate the door toward the range. Lift up the door until it stops. Do not use

the door handle to lift the door. Rotate the door toward the floor and pull it toward you.

2.Close the door as far as the nails or screws will let you.

19

Page 19
Image 19
Whirlpool SF302BSE Removing The Oven Door, To remove, Lift-Upcooktop And Surface Burners Cont, Caring For Your Range