Whirlpool SF3020EG, SF302BEG Lift-Up Cooktop And Surface Burners, Caring For Your Range, Ports

CARING FOR YOUR RANGE

LIFT-UP COOKTOP AND SURFACE BURNERS

1.Remove the surface burner grates.

2.Lift the front of cooktop at both front corners until the support rods lock into place. NOTE: Do not drop the

cooktop. Damage could result to the porcelain and the cooktop frame.

3.Wipe the surface under the cooktop with warm, soapy water and a sponge. Use a soap- filled plastic scrubbing pad on heavily soiled areas.

4.Wipe off the surface burners with warm, soapy water and a sponge after each use. To remove cooked-on food, soak the burners in a vinegar and water

solution for 20-30 minutes. Then scrub them with a plastic scrubbing pad. (See the “Cleaning chart” section for more information.)

5.Check the burner flames once in a while for proper size and shape as shown.

Ports		A good flame is blue in
		color. If flames lift away
	1 "	from ports, are yellow,
	2	or are noisy, turn off the
		burner. Allow the burner
		to cool and follow Step 6.
		If you still have a problem,
		contact an authorized
		service technician to
		check the air/gas mixture
or see the Installation Instructions.

6.If the ports are clogged, clean with a straight pin. DO NOT enlarge or distort the ports.

DO NOT use a tooth-

pick to clean the ports. Toothpick pieces may clog the ports.

7.To lower the cooktop, lift the cooktop from both sides while pressing the support rods back to unlock them. Lower the

cooktop into place.

8.Replace the surface burner grates.

20