Whirlpool SF325PEG, 8053373A Removing The Oven Bottom, Removing The Oven Door Cont, To remove

Models: 8053373A SF325PEG

1 30
Download 30 pages 42.09 Kb
Page 24
Image 24
6.Close the door.

CARING FOR YOUR RANGE

REMOVING THE OVEN DOOR (CONT.)

2.Hold oven door so that the top edge of each hinge hanger is horizontal. Insert hinge hangers into the front frame hinge slots.

3.Tilt top of door toward range. Slide hinge hangers down onto front frame support pins.

NOTE: Make sure the hinge hangers are fully seated and engaged on the support pins.

Door stop

Range

clip

 

Door removal

Hinge

hanger

pin hole

 

 

Support pins

4.Insert the door stop clip with the angular surface at the top of the frame hinge slot, then push in the bottom of the clip until flanges are flush with the front frame.

5.Open the door completely and remove the door removal pins. Save door removal pins for future use.

6.Close the door.

Door removal pin hole REMOVING THE OVEN BOTTOM

Front frame hinge slot

Angular

Manual background surface of door stop clip

REMOVING THE OVEN BOTTOM

You can remove the panel in the oven bottom for cleaning.

To remove:

1.Let oven cool.

2.Remove the oven racks.

3.Remove the 2 hold-down screws at the rear of the oven. If the screws are too tight to remove by hand, use a screwdriver.

Remove

24

Page 24
Image 24
Whirlpool SF325PEG Removing The Oven Bottom, Removing The Oven Door Cont, To remove, Caring For Your Range, Close the door