Lift-up cooktop
1.Remove surface burner grates and reflector pans.
2.Lift front of cooktop at both front comers until the support rods lock into place.
l
l
Personal injury and
Product Damage Hazard
Be sure both support rods are fully extended and in the locked position. Failure to do so could result in personal injury from the cooktop accidentally falling.
Do not drop the cooktop. Damage can result to the porcelain and the cooktop frame.
3.wipe with warm, soapy water. Use a soapy
4.To lower the cooktop, lift cooktop from both sides while pressing the support rods back to unlock them. Lower the
Replace reflector pans and surface burner grates.
Surface burners
1.Lift up the cooktop, following the instructions above.
2.Before cleaning, remove screws that hold each of the burners in place. The screws prevent the burners from wobbling around during shipment. Remove the shipping screws with a Phillips screwdriver and lift the burners up and out. This separates the burners from the mounting bracket under each burner pair.
3.Wipe off surface burners with warm, soapy water and a sponge after each use. To remove
4.if ports are clogged, clean with a straight pin. DO NOT enlarge or distort the ports. DO NOT use a toothpick to clean the ports.
17
