Using Your Range Continued
16
3.Pull drawer out a little farther until levers stay in “up”position. Pull drawer the rest of the way out.
Replacing the storage drawer:
1.Make sure ball bearings on oven slide rail are positioned toward the front of the opening.
2.Fit ends of drawer slide rails into the oven slide rails on both sides of opening.
3.Slide drawer closed.
Use and care guide storage Store this booklet, along with your Cooking Guide and sales slip in the Literature Pat, inside the strorage drawer.
To verify that the
l Remove storage drawer.
lLook to see if the
lMake sure rear leveling leg(s) is positioned under bracket(s).
9 See “Important Safety Instructions” on page 4 and Installation Instructions for further details.
NOTE: The range will not tip during normal use. Tipping can occur if excessive force or weight is applied to open door without