To delay the start using Delay Start Time:
Push the Clean pad. Push the Delay Start
Time pad. START, TIME, CLEAN and “cln” will
light up.
Use the Hour and Minute pads to set the
desired start time. Push the “up” (A) or “down”
(V) pad(s) until the correct time shows in the
display.
Push the Start/Enter pad. DELAY, CLEAN
and the time of day will light up in the display
to indicate that the oven is programmed to
start the Self-Cleaning cycle at a later time.
After the start time has been set, the large
display will go back to showing the current
time of day. DELAY and CLEAN will stay on.
When the start time is reached, DELAY will go
off, TIMED, HEAT, CLEAN and CLEAN TIME
will light up and the oven will start to clean.
4. After the Self-Cleaning cycle is started,
LOCKED lights up in the display when the
oven temperature goes above normal baking
roasting temperatures. The Lock Lever must
not be moved and the door cannot be opened
when LOCKED is on.
5. After the Self-Cleaning cycle is completed,
the time of day will show in the display.
6. When the oven reaches normal baking/
roasting temperatures, LOCKED goes off
and “End” and CLEAN TIME come on. Move
the Lock Lever back to the left. DC NOT
FORCE IT. Wait until it moves easily.