6.Place charcoal filter into opening, resting the back of the filter on tabs “A,” then clip filter tabs “C” into slots “B.”
B
C
A
A.Tab
B.Slot
C.Filter tabs
7.Repeat to install other charcoal filter.
8.Replace metal grease filters. See “Metal Grease Filters” section.
To Replace Charcoal Filters
1.Turn fan and lights off.
2.Pull out on the range hood screen to expose the filters.
3.Remove the 2 metal grease filters. See “To Remove Metal Grease Filters” section.
4.Set metal grease filters aside.
5.Remove and discard both charcoal filters.
6.Install replacement charcoal filters by placing charcoal filter into opening, resting the back of the filter on tabs “A,” then clip filter tabs “C” into slots “B.”
7.Replace metal grease filters. See “Metal Grease Filters” section.
Replacing the Bulb
Turn off the range hood and allow the bulb to cool.
Use a
1.Disconnect power.
2.Remove the screws above the light cover and set them aside.
3.Pull the light cover forward slightly and then downward to remove the cover.
4.Replace the light bulb.
5.Lift cover back into position.
6.Replace the screws.
KWVU Model Series
A
A. Screws
GZ & IH Model Series
A
A. Screws
14