Electrical Requirements

For GZ or IH model series:

WARNING: To reduce the risk of fire or electrical shock, do not use this fan with any solid state speed control device.

For KWVU model series:

This fan is suitable for use with solid state speed controls.

Observe all governing codes and ordinances.

Ensure that the electrical installation is adequate and in conformance with National Electrical Code, ANSI/NFPA 70 (latest edition), or CSA Standards C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No. 0-M91 (latest edition) and all local codes and ordinances.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

A copy of the above code standards can be obtained from:

National Fire Protection Association

One Batterymarch Park

Quincy, MA 02269

CSA International

8501 East Pleasant Valley Road

Cleveland, OH 44131-5575

A 120 Volt, 60 Hz., AC only, 15-amp, fused electrical circuit is required.

If the house has aluminum wiring, follow the procedure below:

1.Connect a section of solid copper wire to the pigtail leads.

2.Connect the aluminum wiring to the added section of copper wire using special connectors and/or tools designed and UL listed for joining copper to aluminum.

Follow the electrical connector manufacturer's recommended procedure. Aluminum/copper connection must conform with local codes and industry accepted wiring practices.

Wire sizes and connections must conform with the rating of the appliance as specified on the model/serial rating plate. The model/serial plate is located behind the filter on the rear wall of the range hood.

Wire sizes must conform to the requirements of the National Electrical Code, ANSI/NFPA 70 (latest edition), or CSA Standards C22. 1-94, Canadian Electrical Code, Part 1 and C22.2 No. 0-M91 (latest edition) and all local codes and ordinances.

INSTALLATION INSTRUCTIONS

Prepare Location

It is recommended that the vent system be installed before the range hood is installed.

Before making cutouts, make sure there is proper clearance within the ceiling or wall for vent fittings.

1.Disconnect power.

2.Determine which venting method to use: roof, wall, or non- vented.

3.Select a flat surface for assembling the range hood. Place covering over that surface.

WARNING

Excessive Weight Hazard

Use two or more people to move and install range hood.

Failure to do so can result in back or other injury.

4.Using 2 or more people, lift range hood onto covered surface.

Range Hood Cabinet Cutout

1.Determine and clearly mark a centerline on the underside of the cabinet.

A

A. Centerline

2. Measure and mark lines as shown for your size of range hood. Use a saber saw or keyhole saw to cut an opening through the underside of the cabinet.

1 ¹⁄₂"

(3.8 cm)

9³⁄₁₆"

(23.3 cm)

30" (76.2 cm) hood - 13 ¹⁄₁₆" (33.2 cm) 36" (91.4 cm) hood - 16 ¹⁄₁₆" (40.8 cm)

The finished cutout size will be:

30" (76.2 cm) range hood - 9³⁄₁₆" x 26¹⁄₈" (23.3 cm x 66.4 cm) 36" (91.4 cm) range hood - 9³⁄₁₆" x 32¹⁄₈" (23.3 cm x 81.6 cm)

7

Page 7
Image 7
Whirlpool Slide-Out Range Hood Installation Instructions, Electrical Requirements, Prepare Location

Slide-Out Range Hood specifications

The Whirlpool Slide-Out Range Hood is a sophisticated kitchen appliance designed to enhance cooking experiences while maintaining a clean and stylish kitchen environment. This innovative range hood stands out for its blend of functionality, versatility, and modern aesthetics.

One of the key features of the Whirlpool Slide-Out Range Hood is its space-saving design. The slide-out mechanism allows the hood to remain hidden when not in use, providing an unobtrusive appearance that integrates seamlessly into your kitchen cabinetry. When needed, it easily extends downward to capture smoke, steam, and cooking odors, making it an ideal choice for both small and open-concept kitchens.

The range hood is equipped with powerful ventilation capabilities, featuring multiple fan speeds that can be adjusted according to your cooking needs. Whether you are simmering a delicate sauce or searing meat at high temperatures, the strength of the ventilation ensures optimal air quality in your kitchen. The range hood also includes a built-in grease filter that effectively traps grease and particulates, contributing to a cleaner cooking environment.

In terms of noise levels, the Whirlpool Slide-Out Range Hood offers quiet operation, allowing you to enjoy conversations or music while cooking. Its streamlined motor design minimizes sound, making it a practical choice for family gatherings or entertaining guests.

Moreover, the Whirlpool range hood incorporates modern technologies such as LED lighting. The bright, energy-efficient lights illuminate your cooking surface, providing better visibility during meal preparation. This feature not only enhances safety but also adds an elegant touch to your kitchen aesthetic.

The installation of the Whirlpool Slide-Out Range Hood is user-friendly, benefiting from detailed instructions that simplify the process. It is designed to be compatible with various kitchen layouts, making it a versatile choice for renovations or new builds.

Additional characteristics include an easy-to-clean exterior, user-friendly control panels, and compatibility with ducted or ductless ventilation systems. This adaptability ensures that homeowners can select the best option for their kitchen setup.

In summary, the Whirlpool Slide-Out Range Hood combines style, efficiency, and modern features, making it an essential addition to any kitchen. Its ability to provide powerful ventilation while blending seamlessly into cabinetry elevates the cooking experience, making it a popular choice among homeowners.