Lift-Up Cooktop
1. Lift front of cooktop at corners and swing up the support rod.
2. Carefully lower the
CAUTICN: Do not drop the oook- top. Damage can result to the
poroelaln and the oooktop tmme.
3.Wipe surface under cooktop with warm soapy water. Use soapy plastic scrub pad on stubborn
Spots.
Surface Burners
TWICAL TOPBURNERRIME
Lift up the
Wipe off surface burners with warm soapy water and a soft cloth after each use.
Occasionally check surface burner flames for size and shape as shown. If flames do not burn properly, you may need to remove the surface burners for cleaning (see pageM], or call a qualified technician for burner adjustments.
To adJust the LO sefflngs on the control knobs:
1. Turn on the surface burners, then set the controls on LO.
2.Wlthout changing the burner rettlngs, remove the control knobs.
3.Firmly grasp the control stem and insert a small bladed screwdriver into the end of the stem. Turn the screwdriver in either direction until the flame height is Yein (.3l8 cm] or lower in size. Flame must be large enough to malntaln a STABLEFLAME on all burner ports.
NEVERADJUST THEFLAME SIZEAT THEMEDIUM SElllNG.
