| RECOMMENDED | |
CONDITION/REASON: | ADJUSTMENT: | |
|
| |
REFRIGERATOR section | Turn | |
too cold | REFRIGERATOR | |
■ Controls not set correctly for your | Control or | |
TEMPERATURE | ||
conditions | ||
Control to next | ||
| ||
| lower number, wait | |
| 24 hours, then re- | |
| check | |
■ Blocked air stream | Move items out of | |
| air stream | |
|
| |
FREEZER section too cold | Turn FREEZER | |
■ Controls not set correctly for your | Control or | |
TEMPERATURE | ||
conditions | ||
Control to next | ||
| ||
| lower number, wait | |
| 24 hours, then re- | |
| check | |
■ Blocked air stream | Move items out of | |
| air stream | |
|
|
REFRIGERATOR FEATURES
Your model may have some or all of these features. Features that can be purchased separately as product accessories are labeled with the word “Accessory.” Not all accessories will fit all models. If you are interested in purchasing one of the accessories, please call the
Refrigerator Shelves
The shelves in your refrigerator are adjustable to match your individual storage needs.
Storing similar food items together in your refrigerator and adjusting the shelves to fit different heights of items will make finding the exact item you want easier. It will also reduce the amount of time the refrigerator door is open, and save energy.
To remove and replace a shelf:
1.Remove items from the shelf.
2.Slide the shelf straight out to the stop.
3.Depending on your model, lift back or front of the shelf past the stop. Slide shelf out the rest of the way.
4.Replace the shelf by sliding the back of the shelf into the track in the wall of the cabinet.
5.Guide the front of the shelf into the shelf track. Be sure to slide the shelf in all the way.
Meat Drawer and Cover
(on some models)
To remove and replace the meat drawer:
1.Slide meat drawer out to the stop.
2.Lift front of meat drawer with one hand while supporting bottom of drawer with other hand. Slide drawer out the rest of the way.
3.Replace the drawer by sliding it back in fully past the drawer stop.
To remove and replace the meat drawer cover:
1.Remove the meat drawer.
2.Push the cover back to release the rear clips from the shelf. Tilt the cover up at the front, and pull it forward.
3.Replace the meat drawer cover by fitting the notches and clips on underside of the cover over the rear and center crossbars on the shelf.
4.Lower cover into place and pull the cover forward to secure the rear clips onto the shelf.
5.Replace the meat drawer.
Meat storage guide
Store most meat in original wrapping as long as it is airtight and
Fresh fish or shellfish | use same day as purchased | |
Chicken, ground beef, variety meats (liver) | ||
Cold cuts, steaks/roasts | ||
Cured meats |
Leftovers - Cover leftovers with plastic wrap, aluminum foil, or plastic containers with tight lids.
11