Whirlpool ST14CKXHW00 Troubleshooting, Your refrigerator will not operate, The lights do not work

Models: ST14CKXHW00

1 20
Download 20 pages 25.81 Kb
Page 15
Image 15
TROUBLESHOOTING

2.Remove all food from the refrigerator and pack all frozen food in dry ice.

3.Empty the ice bin.

4.Depending on your model, turn the Thermostat Control or Refrigerator Control to OFF. See the “Setting the Controls” section.

5.Unplug the refrigerator.

6.Empty water from the defrost pan.

7.Clean, wipe, and dry thoroughly.

8.Take out all removable parts, wrap them well, and tape them together so they don’t shift and rattle during the move.

9.Depending on the model, raise the front of the refrigerator so it rolls more easily OR screw in the leveling legs so they don't scrape the floor. See the “Door Closing” or “Leveling Your Refrigerator” section.

10.Tape the doors shut and the power cord to the refrigerator cabinet.

When you get to your new home, put everything back and refer to the “Installing Your Refrigerator” section for preparation instructions. Also, if your refrigerator has an automatic ice maker, remember to reconnect the water supply to the refrigerator.

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Your refrigerator will not operate

Is the power supply cord unplugged?

Firmly plug the cord into a live outlet with proper voltage.

Has a household fuse or circuit breaker tripped? Replace the fuse or reset the circuit.

Is the Refrigerator Control turned to the OFF position? Refer to the “Setting the Control(s)” section.

Is the refrigerator defrosting?

Recheck to see if the refrigerator is operating in 30 minutes. Your refrigerator will regularly run an automatic defrost cycle.

The lights do not work

Is the power supply cord unplugged?

Firmly plug the cord into a live outlet with proper voltage.

Is a light bulb loose in the socket?

Turn the refrigerator control to OFF. Disconnect the refrigerator from the electrical supply. Gently remove the bulb and reinsert. Then reconnect the refrigerator to the electrical supply and reset the refrigerator control.

Has a light bulb burned out?

Replace with an appliance bulb of the same wattage, size, and shape. See the “Changing the Light Bulb(s)” section.

There is water in the defrost drain pan

Is the refrigerator defrosting?

The water will evaporate. It is normal for water to drip into the defrost pan.

Is it more humid than normal?

Expect that the water in the defrost pan will take longer to evaporate. This is normal when it is hot or humid.

The motor seems to run too much

Is the room temperature hotter than normal?

Expect the motor to run longer under warm conditions. At normal room temperatures, expect your motor to run about 40% to 80% of the time. Under warmer conditions, expect it to run even more of the time.

Has a large amount of food just been added to the refrigerator?

Adding a large amount of food warms the refrigerator. It is normal for the motor to run longer in order to cool the refrigerator back down. See the “Refrigerator Features” section.

Are the doors opened often?

Expect the motor to run longer when this occurs. In order to conserve energy, try to get everything you need out of the refrigerator at once, keep food organized so it is easy to find, and close the door as soon as the food is removed.

Is the control set correctly for the surrounding conditions?

Refer to the “Setting the Control(s)” section.

Are the doors closed completely?

Push the doors firmly shut. If they will not shut all the way, see “The doors will not close completely” later in this section.

Are the condenser coils dirty?

This prevents air transfer and makes the motor work harder. Clean the condenser coils. Refer to the “Cleaning Your Refrigerator” section.

NOTE: Your new refrigerator will run longer than your old one due to its high efficiency motor.

The refrigerator seems to make too much noise

The sounds may be normal for your refrigerators.

Refer to the “Understanding Sounds You May Hear” section.

The ice maker is not producing ice

Is the freezer temperature cold enough to produce ice? Wait 24 hours after hook-up for ice production. See the “Setting the Control(s)” section.

Is the wire shut-off arm in the OFF (arm up) position? Lower the wire shut-off arm to the ON (arm down) position. See the “Ice Maker Operation” section.

Is the water line shut-off valve to the refrigerator turned on?

Turn on the water valve. See the “Connecting the Refrigerator to a Water Source” section.

15

Page 15
Image 15
Whirlpool ST14CKXHW00 manual Troubleshooting, Your refrigerator will not operate, The lights do not work