If You Need Assistance
Or Service
This section is designed to help you save the cost of a service call. First we outline possible problems, their causes and their solutions. However, you may still need assistance or service. When calling our Consumer Assistance Center for help or calling for service, you will need to provide a complete descrip- tion of the problem, your appliance’s complete model and serial numbers and the purchase date. (See page 2.) This information is needed to respond to your request properly.
1. Before calling for assistance . . .
Performance problems often result from little things you can find and fix without tools of any kind. Please check the chart below for problems you can fix. It could save you the cost of a service call.
PROBLEM |
|
| POSSIBLE |
| CAUSE |
|
| ||||
Nothlng | will | The power | cord | is not plugged | into | ||||||
operate |
| a live circuit | with | proper voltage. |
| ||||||
|
|
| A household fuse has blown or a | ||||||||
|
|
| circuit | breaker | has | tripped. |
|
| |||
The | oven | will | The Oven Selector | is not turned | to | ||||||
not | operate | BAKE | or BROIL. |
|
|
|
| ||||
|
|
| A delayed start time has been set. | ||||||||
|
|
| The Oven Temperature Control is | ||||||||
|
|
| not turned to a temperature |
|
| ||||||
|
|
| setting. |
|
|
|
|
|
|
| |
|
|
| The | automatic | MEALTIMER”clock |
| |||||
|
|
| is not set correctly. |
|
|
| |||||
|
|
| The Stop or Start Time Knobs for | ||||||||
|
|
| the automatic | MEALTIMERTM |
|
| |||||
|
|
| clock are not set at the correct time | ||||||||
|
|
| of day. |
|
|
|
|
|
|
| |
The | surface | A household | fuse has blown | or a | |||||||
unlts | will | not | circuit breaker | has | tripped. |
|
| ||||
operate |
| Surface | units | are | not plugged | in | |||||
|
|
| all the way. |
|
|
|
|
|
| ||
|
|
| The control knobs are not being |
| |||||||
|
|
| set | correctly. |
|
|
|
|
|
| |
Control |
| You | are not pushing | in before |
|
| |||||
knob(s) will | turning. |
|
|
|
|
|
|
| |||
not turn |
|
|
|
|
|
|
|
|
|
| |
SOLUTION
Plug the power cord into a live circuit with proper voltage. (See Installation Instructions.)
Replace household fuse or reset circuit breaker.
Turn the Oven Selector to the desired setting.
Wait for the start time to be reached.
Turn the Oven Temperature Control to a temperature setting.
Set the MEALTIMER clockcorrectly. (See “Usingthe automatic MEALTIMER” clock” on page 16.)
If a delay start or stop is not desired, the Stop and Start Time Knobs must be turned to the correct time of day. Turn knobs till they
pop out.
Replace household fuse or reset circuit breaker.
Plug surface units in all the way. (See “Replacing” on page 23.)
Push control knobs in before turning to a setting.
Push control knob(s) in before turning to a setting.
continued on next page
27
