Whirlpool TGP302LW2 manual Surface Burners, Home Canning, To Clean, Cookware Characteristics

Models: TGP302LW2

1 28
Download 28 pages 47.09 Kb
Page 7
Image 7

Surface Burners

IMPORTANT: Do not obstruct the flow of combustion and ventilation air around the burner grate edges.

Burner cap: Always keep the burner cap in place when using a surface burner. A clean burner cap will help prevent poor ignition and uneven flames. Always clean the burner cap after a spillover and routinely remove and clean the caps according to the “General Cleaning” section.

Gas tube opening: Gas must flow freely throughout the gas tube opening for the burner to light properly. Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the gas tube opening. Protect it from spillovers by always using a burner cap.

1

2

1.1-1½” (25-38 mm)

2.Burner Ports

Burner ports: Check burner flames occasionally for proper size and shape as shown above. A good flame is blue in color, not yellow. Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the burner ports.

To Clean:

IMPORTANT: Before cleaning, make sure all controls are off and the oven and cooktop are cool. Do not use oven cleaners, bleach or rust removers.

1.Remove the surface burner grates.

2.Remove burner cap from the burner base and clean according to “General Cleaning” section.

3.Clean the gas tube opening with a damp cloth.

4.Clean clogged burner ports with a straight pin as shown. Do not enlarge or distort the port. Do not use a wooden toothpick. If the burner needs to be adjusted, contact a trained repair specialist.

5.Replace the burner cap.

6.Replace surface burner grates.

7.Turn on the burner. If the burner does not light, check cap alignment. If the burner still does not light, do not service the sealed burner yourself. Contact a trained repair specialist.

Home Canning

When canning for long periods, alternate the use of surface cooking areas, elements or surface burners between batches. This allows time for the most recently used areas to cool.

Center the canner on the grate or largest surface cooking area or element. Canners should not extend more than 1 in. (2.5 cm) outside the cooking area.

Do not place canner on two surface cooking areas, elements or surface burners at the same time.

On ceramic glass models, use only flat-bottomed canners.

On coil element models, the installation of a Canning Unit Kit is recommended. If not installed, the life of the coil element will be shortened. See “Assistance or Service” for ordering instructions.

For more information, contact your local U.S. Government Agricultural Department Extension Office. Companies that manufacture home canning products can also offer assistance.

Cookware

IMPORTANT: Never leave empty cookware on a hot surface cooking area, element or surface burner.

Ideal cookware should have a flat bottom, straight sides, a well- fitting lid and the material should be of medium-to-heavy thickness.

Rough finishes may scratch the cooktop. Aluminum and copper may be used as a core or base in cookware. However, when used as a base they can leave permanent marks on the cooktop or grates.

Cookware material is a factor in how quickly and evenly heat is transferred, which affects cooking results. A nonstick finish has the same characteristics as its base material. For example, aluminum cookware with a nonstick finish will take on the properties of aluminum.

Use the following chart as a guide for cookware material characteristics.

COOKWARE

CHARACTERISTICS

 

 

Aluminum

Heats quickly and evenly.

 

Suitable for all types of cooking.

 

Medium or heavy thickness is best for

 

 

most cooking tasks.

 

 

Cast iron

Heats slowly and evenly.

 

Good for browning and frying.

 

Maintains heat for slow cooking.

 

 

 

Ceramic or

Follow manufacturer’s instructions.

Ceramic glass

Heats slowly, but unevenly.

 

 

Ideal results on low to medium heat

 

 

settings.

 

 

Copper

Heats very quickly and evenly.

 

 

 

Earthenware

Follow manufacturer’s instructions.

 

Use on low heat settings.

 

 

Porcelain

See stainless steel or cast iron.

enamel-on-

 

 

steel or cast

 

 

iron

 

 

 

 

Stainless steel

Heats quickly, but unevenly.

 

A core or base of aluminum or copper

 

 

on stainless steel provides even

 

 

heating.

 

 

 

7

Page 7
Image 7
Whirlpool TGP302LW2 manual Surface Burners, Home Canning, To Clean, Cookware Characteristics

TGP302LW2 specifications

The Whirlpool TGP302LW2 is an impressive built-in gas cooktop that showcases a blend of functionality and stylish design. Perfect for any modern kitchen, this appliance is not only efficient but also enhances the cooking experience with its advanced features and user-friendly attributes.

One of the standout features of the TGP302LW2 is its powerful cooking performance. It comes equipped with four sealed burners, providing versatility for various culinary tasks. The burners include a high-output burner for rapid boiling and high-heat cooking, allowing users to quickly prepare dishes without waiting. The additional burners offer medium and low heat options for simmering or gently warming sauces and soups.

The cooktop is designed with a sleek, clean look, featuring stainless steel construction that not only adds a modern touch to your kitchen but is also easy to clean. The durable finish prevents scratches and stains, maintaining the aesthetic appeal of the appliance over time. The continuous cast iron grates are another remarkable aspect, providing a strong and stable surface for cookware. These grates allow for smooth transitions between burners, making it effortless to move pots and pans around as needed.

Efficiency is further enhanced by the inclusion of the SpeedHeat burner technology, which provides an intense heat output that shortens cooking time. This innovative feature ensures that meals can be cooked quickly without compromising flavor or quality. Additionally, the TGP302LW2 incorporates a heavy-duty construction that guarantees longevity and consistent performance, making it an excellent investment for any home chef.

Safety is a priority, and the Whirlpool TGP302LW2 includes features such as a flame failure device that automatically shuts off the gas supply if the flame goes out, providing peace of mind during cooking. The electronic ignition system ensures quick and reliable burner lighting, eliminating the need for matches or lighters.

In terms of installation, the cooktop offers a flexible design that fits seamlessly into various countertop configurations, making it a versatile choice for renovations or new builds. The intuitive control knobs are positioned at the front, allowing for easy access and excellent control.

Overall, the Whirlpool TGP302LW2 stands out as a sophisticated gas cooktop that combines high performance with utility and style, making it a prime choice for those who value quality in their cooking appliances. Whether you are an everyday cook or a culinary enthusiast, this cooktop is sure to elevate your kitchen experience.