Whirlpool TT14DKXEW11 manual Reversing The Door Swing, Tools Needed, Important Information

Models: TT14DKXEW11

1 56
Download 56 pages 55.75 Kb
Page 25
Image 25
REVERSING THE DOOR SWING

REVERSING THE DOOR SWING

TOOLS NEEDED:

516-inch hex-head socket wrench, No. 2 Phillips screw- driver, flat-head screwdriver, 12-inch open-end wrench.

SUGGESTION: Reversing the door swing should be performed by a qualified person.

IMPORTANT INFORMATION:

Before you begin, turn refrigerator OFF, unplug it, and remove any food from door shelves.

When removing hinges, keep doors closed until ready to lift free from cabinet.

To remove doors, start at the top hinge and work your way down.

To replace doors, start at the bottom hinge and work your way up.

Line up doors so they are centered between the sides of the cabinet and parallel with each other.

Seal all unused openings with screws or plastic plugs. Moisture will enter any openings.

NOTE: After the doors are reversed, reinstall the handles. If the doors are not shutting on their own, see “Leveling” in the “Installing Your Refrigerator” section.

Reversing the hinges

TOP HINGE

Screws

Cover

Top hinge

Shim

Spacer

Screws

CENTER HINGE

Door stop

Spacer

Shim

Hinge

Bracket

Screws

BOTTOM HINGE

Door stop

Spacer

Shim

Hinge Pin

Screws

25

Page 25
Image 25
Whirlpool TT14DKXEW11 manual Reversing The Door Swing, Tools Needed, Important Information, Reversing the hinges