3.Screw light bulb into socket.
Replacing the Incandescent Light Bulb
Turn off the range hood and allow the light bulb to cool.
1.Disconnect power.
2.Squeeze the plastic lens cover and remove it from the hood.
A B
4.Replace lens cover by squeezing cover and inserting tabs into slots.
5.Reconnect power.
If new light does not operate, make sure the lamp is inserted correctly before calling service.
A. Light bulb socket
B. Lens cover
WIRING DIAGRAM
SE113B | Light Switch | Motor Switch |
| On - Off | Low - Off - High |
BK
W
Motor Characteristics
Power Supply |
| 120 VAC | |
Frequency |
| 60 Hz | |
Amperage |
| 0.35 ±10% A | |
Wattage Rating |
| 21 ±10% Watts | |
Motor Resistance | |||
White - Red |
| 46.9 ±10% Ohms | |
White - Black |
| 37.2 ±10% Ohms | |
|
| BR |
|
| Speed 2 |
W | W | BK |
N
BK
BR | BK | R |
|
|
|
W R |
| |
Common | Speed 1 |
|
W | R | BK |
C10
L
Ground Screw
GND
9
