INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools needed

Drill

1¹⁄₄" (3.0 cm) drill bit

¹⁄₈" (3.0 mm) drill bit for pilot holes

Pencil

Wire stripper or utility knife

Tape measure or ruler

Caulking gun and weatherproof caulking compound

Flat-blade screwdriver

Phillips screwdriver

Saber or keyhole saw

Metal snips

Compass or 8" (20.3 cm) circle template

Parts supplied

Remove parts from package. Check that all parts are included.

2 - 3.5 x 5 mm screws

3¹⁄₄" x 10" (8.3 x 25.4 cm) rectangular damper

T-10 Torx®† adapter

4 - 4.5 x 13 mm mounting screws

Parts needed

Wall or roof cap with damper to match vent system

3 - UL listed wire connectors

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

It is the installer’s responsibility to comply with installation clearances specified on the model/serial rating plate. The model/serial rating plate is located inside the range hood on the left wall.

Range hood location should be away from strong draft areas, such as windows, doors and strong heating vents.

Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance. Consult the cooktop/range manufacturer installation instructions before making any cutouts.

Grounded electrical outlet is required. See “Electrical Requirements” section.

All openings in ceiling and wall where range hood will be installed must be sealed.

These range hoods are factory set for vented installations. Models that are capable of being installed as non-vented (recirculating) require charcoal filters. See the “Accessories” section to order charcoal filter kit.

For Mobile Home Installations

The installation of this range hood must conform to the Manufactured Home Construction Safety Standards, Title 24 CFR, Part 328 (formerly the Federal Standard for Mobile Home Construction and Safety, title 24, HUD, Part 280) or when such standard is not applicable, the standard for Manufactured Home Installation 1982 (Manufactured Home Sites, Communities and Setups) ANSI A225.1/NFPA 501A, or latest edition, or with local codes.

Product Dimensions

Vent clamps/duct tape as required

For 7" (17.8 cm) round vented installations:

⁷⁄₈" (2.2 cm)

6⁹⁄₁₆" (16.7 cm)

7" (17.8 cm) round metal vent system

7" (17.8 cm) round damper. For information on ordering, see the “Accessories” section.

7" (17.8 cm) round vent mounting plate. For information on ordering, see the “Accessories” section.

For 3¹⁄₄" x 10" (8.3 x 25.4 cm) rectangular vented installations:

3¹⁄₄" x 10" (8.3 x 25.4 cm) rectangular metal vent system

For non-vented (recirculation) installations:

Charcoal filter kit. For information on ordering, see the “Accessories” section.

For cabinets with recessed bottoms:

Two 2" (5.1 cm) wide filler strips. Length and thickness determined by recess dimensions.

Four flat head wood screws or machine screws with washers and nuts (to attach filler strips).

4¹⁵⁄₁₆"

⁷⁄₈"

(12.5 cm)

(2.2 cm)

29¹⁵⁄₁₆" (76.0 cm) or

35¹⁵⁄₁₆" (91.0 cm)

1" (2.5 cm)

9" (22.9 cm)

1¹⁄₂"

(3.8 cm) 18⁵⁄₈"

(47.3 cm)

†®TORX is a registered trademark of Saturn Fasteners, Inc.

4

Page 4
Image 4
Whirlpool UXT5230AYB, UXT5230AYS, UXT5236AYS Installation Requirements, Tools and Parts, Location Requirements

UXT5236AYS, UXT5230AYB, UXT5230AYS specifications

The Whirlpool UXT5230AYS, UXT5230AYB, and UXT5236AYS are three highly regarded under-cabinet range hoods that blend contemporary design with cutting-edge technology, aiming to enhance the efficiency and aesthetics of modern kitchens. Each model is designed to provide powerful ventilation while maintaining a streamlined appearance, complementing various kitchen styles.

One of the standout features of these range hoods is their robust airflow capacity, which effectively removes smoke, odors, and steam produced while cooking. With a maximum CFM (cubic feet per minute) rating of 190, these models ensure that your kitchen remains fresh and free from lingering smells. The adjustable fan speeds offer the flexibility needed to match the ventilation power with the intensity of your cooking, ensuring optimal performance for both light and heavy-duty culinary tasks.

The UXT5230AYS and UXT5230AYB models come equipped with a convenient push-button control system. This user-friendly interface makes it easy to adjust fan speeds and turn the hood's lights on and off, providing hassle-free operation while cooking. Additionally, the UXT5236AYS features similar controls but with an enhanced design aesthetic to cater to various consumer preferences.

Lighting is crucial in the kitchen, and these range hoods do not disappoint with their bright, energy-efficient LED lighting. This lighting casts a clear beam over your cooking surfaces, making food preparation safer and more enjoyable. The longevity of LED lights minimizes the need for frequent replacements, making these hoods a cost-effective choice in the long run.

Maintenance has been simplified as well, with stainless steel baffle filters that are both durable and easy to clean. These filters capture grease effectively while adding a sophisticated touch to the hood’s design. They are dishwasher safe, allowing for effortless cleaning without the risk of damage.

In terms of installation, the UXT5230AYS and UXT5230AYB models have a slim profile, making them ideal for kitchens with limited space. Each unit is designed to fit comfortably under cabinets while providing sufficient coverage over cooking surfaces.

Overall, the Whirlpool UXT5230AYS, UXT5230AYB, and UXT5236AYS range hoods stand out in terms of performance, design, and functionality. They are excellent choices for homeowners looking to enhance their kitchen's ventilation and overall efficiency while enjoying the benefits of modern technology and stylish aesthetics.