Whirlpool W10057363B Connect ground wire, Connect remaining wires, Remove center screw

3. Connect ground wire

A

F

Connect ground wire (F) (green or bare) of power supply cord under green external ground conductor screw (A). Tighten screw.

4. Connect remaining wires

Connect remaining wires under outer terminal block screws. Tighten screws. Finally, reinsert tab of terminal block cover into slot of dryer rear panel. Secure cover with hold-down screw. Now, go to Venting Requirements.

3-Wire Power Supply Cord Connection

Use where local codes permit connecting cabinet-ground conductor to neutral wire.

1. Remove center screw

B

Remove center terminal block screw (B).

2. Connect neutral wire

B

C

Connect neutral wire (white or center) (C) of power supply cord under center terminal block screw (B). Tighten screw.

3. Connect remaining wires

		Connect remaining wires under outer terminal block screws.
3-wire receptacle (NEMA	3-prong plug	Tighten screws. Finally, reinsert tab of terminal block cover
type 10-30R)		into slot of dryer rear panel. Secure cover with hold-down
		screw. Now, go to Venting Requirements.

Spade terminals with	Ring terminals
upturned ends

9