Whirlpool W10120482A Recessed Area and Closet Installation Instructions, Product Dimensions

Recessed Area and Closet Installation Instructions

This dryer must not be installed behind a lockable door, a sliding door, or a door with a hinge on the opposite side to that of the dryer.

Product Dimensions

Dimensions shown with feet extended 2.5 cm (1") from bottom of dryer.

This dryer may be installed in a recessed area or closet. For recessed area and closet installations, minimum clearances can be found on the serial tag on the dryer.

The installation spacing is in centimeters (inches) and is the minimum allowable. Additional spacing should be considered for ease of installation, servicing, and compliance with local codes and ordinances.

If closet door is installed, the minimum unobstructed air opening in the top and bottom is required. Louvered doors with equivalent air openings are acceptable.

The dryer must be exhausted outdoors.

No other fuel-burning appliance may be installed in the same closet as the dryer.

Minimum Installation Clearances

27.9 cm

(11")

109.5 cm
(43-1/8")
	97.2	cm		3.8 cm
	(38-1/4")			(1-1/2")
			gas line
			opening

An electrical outlet is required within 1.4 m (4-1/2 feet) for the power supply cord

35.6 cm (14") door clearance

15.9 cm (6-1/4")

	35.6 cm
	(14") max.
45.7 cm	Closet
(18")*
	door
	10.2 cm
2.5 cm (1")	(4")
	2.5 cm (1")

2.5 cm (1")

Recessed front view Closet side view

Additional clearances for wall, door and floor moldings may be required or if external exhaust elbow is used.

74.3cm (29-1/4")

68.6 cm (27")

Exhaust dimensions

310cm2

(48"2)

Front

View

155cm2

(24"2)

7.6 cm (3")

closet

door

7.6 cm (3")

10.2 cm (4")

35.9 cm

(14-1/8")

back

exhaust

10.8 cm (4-1/4")

26 cm

(10-1/4")

left or right side exhaust

*Opening is the minimum for a closet door.

Louvered doors with equivalent air openings are acceptable.

5