INSTALLATION REQUIREMENTS
LOCATION REQUIREMENTS
Additional items needed:
Towel
Parts supplied:
Sponge |
NOTE: If the washer/dryer and pedestal assembly are located in a garage, 8" (203 mm) must be added under the pedestal so that the washer/dryer is 18" (458 mm) above the garage floor.
TOOLS AND PARTS
Gather the required tools and parts before starting installation.
Tools needed:
Four #12 x 5/8" | Two retainer clips |
sheet metal screws | (in parts bag) |
(in parts bag) |
|
Utility knife
Level |
1/4"
9/16"
Pliers or | Bucket |
2
