Is the sink or drain clogged?

Sink and drainpipe must be able to carry away 17 gal. (64 L) of water per minute. If the sink or drain is clogged or slow, water can back up out of drainpipe or sink. Check household plumbing (laundry tubs, faucets, drainpipe, water pipes) for leaks.

Dispenser operation

Did you follow the manufacturer’s directions when adding detergent and fabric softener to the dispensers? Measure detergent and fabric softener. Slowly pour into the dispensers. Wipe up all spills. Dilute fabric softener in the fabric softener dispenser.

Did you put powdered or liquid color-safe bleach into the liquid chlorine bleach dispenser (on some models)?

Add powdered or liquid color-safe bleach directly to the washer basket. Do not use the chlorine bleach dispenser for color-safe bleach.

Is the fabric softener dispenser clogged?

Clean the fabric softener dispenser. See “Washer Care” for details.

Are the laundry products in the correct dispenser compartment?

Add the correct amounts of detergent, fabric softener or liquid chlorine bleach to the correct compartments. Add powdered or liquid color-safe bleach to the Main Wash compartment.

Is there water in the dispenser at the end of the cycle? A small amount of water will remain in the dispenser compartment. This is normal.

Washer odor

Have you run the Clean Washer Cycle lately?

To freshen your washer and to avoid odors, see “Cleaning Your Washer.”

Are you using HE detergent?

Use of non-HE detergent can cause a film residue which can result in odor.

Did you leave the door open after use?

This washer has a tight seal to avoid water leaks. To avoid odors leave the door open to allow the washer to dry between uses.

Door won't unlock

Did all of the water drain out of the washer during the spin?

Select DRAIN/SPIN to remove any water remaining in the washer. The washer door will unlock at the end of the drain.

Is the door locked and is the “Add A Garment” light on? Press PAUSE/CANCEL once. The door will unlock.

Washer Operation

Washer won't power up

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Is the power cord plugged into a grounded 3 prong outlet? Plug power cord into a grounded 3 prong outlet.

Are you using an extension cord? Do not use an extension cord.

Has a household fuse blown, or has a circuit breaker tripped?

Check that the washer is plugged into a working outlet, and check for blown fuses. Replace the fuse, or reset the circuit breaker. If the problem continues, call an electrician.

Is your voltage low?

Check electrical source or call electrician.

Washer cycle won’t start

Is the washer door firmly shut?

The door must be closed during operation.

Has a cycle been selected, but START has not been selected and held for 1 second?

Press and hold START, for 1 second.

Was the door open after completion of last cycle?

The door must be opened and closed again to start a new cycle.

Is the door locked?

If door is locked, run a drain cycle and drain the washer.

Control won’t accept selections or won’t shut off

Are the touch pad controls locked?

Hold for 3 seconds the button to lock/unlock controls.

23

Page 23
Image 23
Whirlpool W10235934A manual Washer Operation

W10235934A specifications

The Whirlpool W10235934A is a high-performance appliance designed to enhance the efficiency and convenience of household tasks, specifically in laundry care. As a key component within Whirlpool’s extensive lineup of washers, this model integrates a range of features and technologies that cater to modern consumer needs.

One of the standout characteristics of the W10235934A is its advanced sensor technology. This feature intelligently monitors the level of moisture in clothes, adjusting the drying time as needed to prevent over-drying and ensure optimal fabric care. By preventing excessive heat exposure, this technology not only extends the lifespan of garments but also helps reduce energy consumption, making it an eco-friendly choice for environmentally conscious consumers.

The W10235934A is designed with a focus on user convenience. Its intuitive controls and user-friendly interface enable users to easily select drying cycles suited for various fabric types, ensuring that every piece of clothing gets the care it needs. Whether it’s delicates, regular cottons, or heavy towels, this appliance provides tailored drying options to meet the specific requirements of different fabric blends.

Another key feature of the Whirlpool W10235934A is its large capacity. With ample space to accommodate substantial laundry loads, this appliance is ideal for families or individuals with busy lifestyles. The spacious design reduces the frequency of laundry days, allowing users to manage their time more effectively. Moreover, this model can tackle bulky items like comforters and blankets with ease, proving its versatility in various laundry situations.

The durability and design of the W10235934A further underline its quality. Made with premium materials, this appliance is built to withstand the rigors of daily use. Its sleek and modern aesthetic complements a range of home decors, making it a stylish addition to any laundry room.

In terms of maintenance, the Whirlpool W10235934A boasts features that simplify upkeep. The lint filter is designed for easy access and cleaning, ensuring optimal performance while promoting safety by preventing lint buildup, which is a common cause of dryer fires.

Overall, the Whirlpool W10235934A stands out in the crowded appliance market with its blend of advanced technology, user-centric design, and powerful performance. For anyone seeking a reliable and efficient drying solution, this model represents a noteworthy investment for modern living.