Manuals / Whirlpool / Laundry Appliance / Washer

Whirlpool W10235934A Are the touch pad buttons not responding?, When the washer stops working

Models: W10235934A

1 56
Download 56 pages 19.76 Kb
Page 24
Image 24

■Are the touch pad buttons not responding?

Press STOP on the touch-pad twice. Check the touch-pad/ LED assembly by selecting different cycles and changing the modifiers and options available to confirm the touch-pad/LED assembly is responding.

Washer stops working

■Does the washer shut down the same time in the same wash cycle repeatedly?

Unplug washer or disconnect power. Wait 5 minutes. Plug in washer or reconnect power. Run another cycle.

When the washer stops working

At the beginning of the cycle:

Washer won’t dispense

■Is the washer level?

Check that the washer is level. See “Level Washer.”

■Has the drawer dispensed detergent?

Check that the dispenser drawer is not clogged with detergent.

■Are both the hot and cold water faucets turned on? Check water hose connections to the washer. Check for plugged screen in water source. Check the water supply and the water valve.

Washer won’t fill

■Low water pressure at home?

Check if the home has low water pressure, open the water faucets.

■Are both the hot and cold water faucets turned on? Verify hot and cold valve at the water faucets are fully open.

■Is the water inlet hose kinked?

Straighten the hoses. Check water hose connections to the washer and make sure water supply hoses are not obstructed. Check for plugged screen.

■Are the water inlet valve screens clogged?

Turn off the water and remove inlet hoses from the washer. Remove any accumulated film or particles. Reinstall hoses, turn on water, and check for leaks.

■Are you using HE detergent?

HE detergent is a low sudsing detergent. This is normal and will not affect cleaning performance.

■Low water?

This washer uses very little water to provide good cleaning results. You will see little or no water splashing in this washer. This is normal.

Washer won’t run

■Is the washer in a normal pause in the cycle?

The washer pauses for about 2 minutes during certain cycles. Allow the cycle to continue. Some cycles feature periods of tumbling and soak.

■Is the washer overloaded? Wash smaller loads.

Incorrect water temperature or Wash/Rinse temperature

■Are the hot and cold water inlet hoses reversed? See “Connect the Inlet Hoses.”

■Are you washing many loads?

As your frequency of loads washed increases, the water temperature may decrease for hot and warm temperatures. This is normal.

24

Not enough water/Not enough suds

■Low water?

This washer uses very little water to provide good cleaning results. You will see little or no water splashing in this washer. This is normal.

■Are you using HE detergent?

HE detergent is a low sudsing detergent. This is normal and will not affect cleaning performance.

When the washer stops working

At the middle of the cycle:

Washer continues to fill or drain, cycle seems stuck

■Is the top of drain hose lower than 30" (760 mm) on washer?

The top of the drain hose must be at least 30" (760 mm) above the floor. See “Drain System.” Check that the washer is level. Check if the valve is blocked open. If the valve is blocked open, uncontrolled filling will occur.

■Does the drain hose fit too tightly in the standpipe, or is it taped to the standpipe?

The drain hose should be loose yet fit securely. Do not seal the drain hose with tape. The hose needs an air gap. See “Secure the Drain Hose.”

Washer won’t drain or spin, water remains in washer

■Is the drain hose clogged, or the end of the drain hose more than 96" (2.4 m) above the floor?

See “Installation Requirements.”

■Does the drain hose fit too tightly in the standpipe, or is it taped to the standpipe?

The drain hose should be loose yet fit securely. Do not seal the drain hose with tape. The hose needs an air gap. See “Secure the Drain Hose.”

■Excessive suds?

When excessive suds are detected, a special suds routine automatically starts. Cycle will complete once extra suds are removed. This will occur more frequently when a non-HE detergent is used.

■Is the load balanced?

A single or bulky item may cause imbalance. Add more items or redistribute the load.

Washer motor overheats

■If the washer motor overheats, call for service.

Noise, Vibration, & Time

Washer vibrates

■Are the shipping bolts removed?

Verify the shipping system including shipping bolts and spacers are removed, and power cord out of the washer.

■Is the washer level?

Check leveling feet. See “Level Washer.”

Page 23 Page 25
Page 24
Image 24
Whirlpool W10235934A Are the touch pad buttons not responding?, When the washer stops working, Low water?, Excessive suds?
Page 23 Page 25

W10235934A specifications

The Whirlpool W10235934A is a high-performance appliance designed to enhance the efficiency and convenience of household tasks, specifically in laundry care. As a key component within Whirlpool’s extensive lineup of washers, this model integrates a range of features and technologies that cater to modern consumer needs.

One of the standout characteristics of the W10235934A is its advanced sensor technology. This feature intelligently monitors the level of moisture in clothes, adjusting the drying time as needed to prevent over-drying and ensure optimal fabric care. By preventing excessive heat exposure, this technology not only extends the lifespan of garments but also helps reduce energy consumption, making it an eco-friendly choice for environmentally conscious consumers.

The W10235934A is designed with a focus on user convenience. Its intuitive controls and user-friendly interface enable users to easily select drying cycles suited for various fabric types, ensuring that every piece of clothing gets the care it needs. Whether it’s delicates, regular cottons, or heavy towels, this appliance provides tailored drying options to meet the specific requirements of different fabric blends.

Another key feature of the Whirlpool W10235934A is its large capacity. With ample space to accommodate substantial laundry loads, this appliance is ideal for families or individuals with busy lifestyles. The spacious design reduces the frequency of laundry days, allowing users to manage their time more effectively. Moreover, this model can tackle bulky items like comforters and blankets with ease, proving its versatility in various laundry situations.

The durability and design of the W10235934A further underline its quality. Made with premium materials, this appliance is built to withstand the rigors of daily use. Its sleek and modern aesthetic complements a range of home decors, making it a stylish addition to any laundry room.

In terms of maintenance, the Whirlpool W10235934A boasts features that simplify upkeep. The lint filter is designed for easy access and cleaning, ensuring optimal performance while promoting safety by preventing lint buildup, which is a common cause of dryer fires.

Overall, the Whirlpool W10235934A stands out in the crowded appliance market with its blend of advanced technology, user-centric design, and powerful performance. For anyone seeking a reliable and efficient drying solution, this model represents a noteworthy investment for modern living.