INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. The parts supplied are in the washer drum.

Tools needed for connecting the water inlet hoses

Pliers (that open to 19/16 [39.5 mm])

Flashlight (optional)

Tools needed for installation

Open end wrenches 14 mm and 13 mm

Level

Wood block

Ruler or measuring tape

Parts supplied

Options

Pedestal

You have the option of purchasing pedestals of different heights separately for this washer. You may select a 10" (254 mm) or a 15.5" (394 mm) pedestal. The pedestal will add to the total height of the washer.

Optional pedestal

AB

E

A.U-shaped hose form

B.Water inlet hoses (2)

C.Inlet hose washers (4)

CD

D. Transit bolt hole plug (4) E. Beaded tie strap

Pedestal

Approximate

Color

Model

Height

Height with

 

Number

 

Washer

 

 

 

 

 

 

10" (254 mm)

46" (1168 mm)

White

WHP1000SQ

 

 

 

 

15.5" (394 mm)

51.5" (1308 mm)

White

WHP1500SQ

Stack Kit

Are you planning to stack your washer and dryer? To do so, you will need to purchase a Stack Kit.

Alternate Parts

Your installation may require additional parts. If you are interested in purchasing one of the items listed here, call the toll-free number on the cover or in the “Assistance or Service” section.

If You Have

You Will Need to Buy

 

 

Laundry tub or

Sump pump system (if not already

standpipe taller

available)

than 96" (2.4 m)

 

 

 

Overhead sewer

Standard 20 gal. (76 L), 30" (762 mm) tall

 

drain tub or utility sink and sump pump

 

(available from local plumbing suppliers)

 

 

Floor drain

Siphon break, Part Number 285834;

 

additional drain hose

 

Part Number 8318155; and connector

 

kit, Part Number 2858835

 

 

Drain hose too

4 ft (1.2 m) drain hose extension kit,

short

Part Number 2858863

 

 

Water faucets

2 longer water fill hoses:

beyond reach of fill

6 ft (1.8 m) Part Number 76314

hoses

10 ft (3.0 m) Part Number 350008

 

 

To order, call the dealer from whom you purchased your washer or refer to the “Assistance or Service” section of this manual. Ask for Part Number 8572546.

Location Requirements

Selecting the proper location for your washer improves performance and minimizes noise and possible washer “walk.”

Your washer can be installed under a custom counter, or in a basement, laundry room, closet, or recessed area. See “Drain System.”

Companion appliance location requirements should also be considered. Proper installation is your responsibility.

You will need

A water heater set to deliver 120°F (49°C) water to the washer.

A grounded electrical outlet located within 6 ft (1.8 m) of where the power cord is attached to the back of the washer. See “Electrical Requirements.”

Hot and cold water faucets located within 4 ft (1.2 m) of the hot and cold water fill valves, and water pressure of 20-100 psi (137.9-689.6 kPa).

A level floor with a maximum slope of 1" (25 mm) under entire washer. Installing the washer on soft floor surfaces, such as carpets or surfaces with foam backing, is not recommended.

A sturdy and solid floor to support the washer with a total weight (water and load) of 400 lbs (180 kg).

4

Page 4
Image 4
Whirlpool W10235934A manual Installation Requirements, Tools and Parts, Options, Location Requirements

W10235934A specifications

The Whirlpool W10235934A is a high-performance appliance designed to enhance the efficiency and convenience of household tasks, specifically in laundry care. As a key component within Whirlpool’s extensive lineup of washers, this model integrates a range of features and technologies that cater to modern consumer needs.

One of the standout characteristics of the W10235934A is its advanced sensor technology. This feature intelligently monitors the level of moisture in clothes, adjusting the drying time as needed to prevent over-drying and ensure optimal fabric care. By preventing excessive heat exposure, this technology not only extends the lifespan of garments but also helps reduce energy consumption, making it an eco-friendly choice for environmentally conscious consumers.

The W10235934A is designed with a focus on user convenience. Its intuitive controls and user-friendly interface enable users to easily select drying cycles suited for various fabric types, ensuring that every piece of clothing gets the care it needs. Whether it’s delicates, regular cottons, or heavy towels, this appliance provides tailored drying options to meet the specific requirements of different fabric blends.

Another key feature of the Whirlpool W10235934A is its large capacity. With ample space to accommodate substantial laundry loads, this appliance is ideal for families or individuals with busy lifestyles. The spacious design reduces the frequency of laundry days, allowing users to manage their time more effectively. Moreover, this model can tackle bulky items like comforters and blankets with ease, proving its versatility in various laundry situations.

The durability and design of the W10235934A further underline its quality. Made with premium materials, this appliance is built to withstand the rigors of daily use. Its sleek and modern aesthetic complements a range of home decors, making it a stylish addition to any laundry room.

In terms of maintenance, the Whirlpool W10235934A boasts features that simplify upkeep. The lint filter is designed for easy access and cleaning, ensuring optimal performance while promoting safety by preventing lint buildup, which is a common cause of dryer fires.

Overall, the Whirlpool W10235934A stands out in the crowded appliance market with its blend of advanced technology, user-centric design, and powerful performance. For anyone seeking a reliable and efficient drying solution, this model represents a noteworthy investment for modern living.