Water Inlet Hoses

Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect and replace inlet hoses if bulges, kinks, cuts, wear or leaks are found.

When replacing your inlet hoses, record the date of replacement.

Vacation, Storage, and Moving Care

Install and store your washer where it will not freeze. Because some water may stay in the hoses, freezing can damage your washer. If storing or moving your washer during freezing weather, winterize it.

Non-use or vacation care:

Operate your washer only when you are at home. If you will be on vacation or not using your washer for an extended period of time, you should:

■Unplug washer or disconnect power.

■Turn off the water supply to the washer. This helps avoid accidental flooding (due to a water pressure surge) while you are away.

■Slightly open door to provide ventilation.

To winterize washer:

1.Put 1 qt (1 L) of R.V.-type antifreeze in the drum.

2.Run washer on a Drain/Spin cycle.

3.Unplug washer or disconnect power.

4.Shut off both water faucets.

5.Disconnect water inlet hoses from faucets and drain.

To use washer again:

1.Flush water pipes.

2.Reconnect water inlet hoses to faucets.

3.Turn on both water faucets.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

4.Plug in washer or reconnect power.

5.Run the washer through the Normal/Casual cycle with ½ the manufacturer’s recommended amount of HE detergent for a medium-size load, to clean the washer and remove the antifreeze, if used.

To transport the washer:

1.If washer will be moved during freezing weather, put in 1 qt (1 L) of R.V.-type antifreeze in the drum. Run washer on a Drain/Spin cycle.

2.Unplug the power cord.

3.Disconnect the drain hose from the drain system and attach to rear panel clips.

4.Shut off both water faucets.

5.Disconnect the water inlet hoses from faucets, then drain the hoses and clip them to the rear panel of the washer.

6.IMPORTANT: Call service. Do not reuse transport bolts. Washer must be transported in the upright position. To avoid suspension and structural damage, your machine must be properly set up for relocation by a certified technician.

Reinstalling the washer

1.Follow the “Installation Instructions” to locate, level and connect the washer.

2.Run the washer through the Normal/Casual cycle with ½ the manufacturer’s recommended amount of HE detergent for a medium-size load, to clean the washer and remove the antifreeze, if used.

21

Page 20 Page 22
Page 21
Image 21
Whirlpool W10235934A manual Water Inlet Hoses, Vacation, Storage, and Moving Care, Non-use or vacation care
Page 20 Page 22

W10235934A specifications

The Whirlpool W10235934A is a high-performance appliance designed to enhance the efficiency and convenience of household tasks, specifically in laundry care. As a key component within Whirlpool’s extensive lineup of washers, this model integrates a range of features and technologies that cater to modern consumer needs.

One of the standout characteristics of the W10235934A is its advanced sensor technology. This feature intelligently monitors the level of moisture in clothes, adjusting the drying time as needed to prevent over-drying and ensure optimal fabric care. By preventing excessive heat exposure, this technology not only extends the lifespan of garments but also helps reduce energy consumption, making it an eco-friendly choice for environmentally conscious consumers.

The W10235934A is designed with a focus on user convenience. Its intuitive controls and user-friendly interface enable users to easily select drying cycles suited for various fabric types, ensuring that every piece of clothing gets the care it needs. Whether it’s delicates, regular cottons, or heavy towels, this appliance provides tailored drying options to meet the specific requirements of different fabric blends.

Another key feature of the Whirlpool W10235934A is its large capacity. With ample space to accommodate substantial laundry loads, this appliance is ideal for families or individuals with busy lifestyles. The spacious design reduces the frequency of laundry days, allowing users to manage their time more effectively. Moreover, this model can tackle bulky items like comforters and blankets with ease, proving its versatility in various laundry situations.

The durability and design of the W10235934A further underline its quality. Made with premium materials, this appliance is built to withstand the rigors of daily use. Its sleek and modern aesthetic complements a range of home decors, making it a stylish addition to any laundry room.

In terms of maintenance, the Whirlpool W10235934A boasts features that simplify upkeep. The lint filter is designed for easy access and cleaning, ensuring optimal performance while promoting safety by preventing lint buildup, which is a common cause of dryer fires.

Overall, the Whirlpool W10235934A stands out in the crowded appliance market with its blend of advanced technology, user-centric design, and powerful performance. For anyone seeking a reliable and efficient drying solution, this model represents a noteworthy investment for modern living.
Top Page Image Contents