On models with notches:

■Slide the indicator down into the notches, facing outward.

NOTE: The indicator will not easily slide into the notches if the rear bubble has not been popped.

■Close the air filter door, and check that the indicator is visible through the rectangular hole in the door.

On models without notches:

■Store the indicator in a visible place you will easily remember - either inside the refrigerator, or elsewhere in your kitchen or home.

Style 2 - Air Filter Status on Electronic Control Display

The control panel displays the Air Filter status.

■GOOD - The air filter LED does not light up.

■REPLACE - The air filter LED lights up constantly when the refrigerator door is open.

■EXPIRED - The air filter LED lights up constantly and flashes when the refrigerator door is open.

After replacing the air filter, press and hold FILTERS RESET for

3 seconds. The filter icons will turn off. See “Using the Control(s).”

NOTE: At any filter status, pressing and holding FILTERS RESET for 3 seconds will reset the air filter status to good and the air filter LED will turn off.

Replacing the Air Filter

The disposable air filter should be replaced every 6 months, or when the status indicator air filter icon LED turns on and starts flashing when the refrigerator door is opened.

To order a replacement air filter, contact us using the assistance/service information following the warranty.

1.Remove the old air filter by squeezing in on the side tabs.

2.Remove the old status indicator.

3.Install the new air filter and reset the status indicator using the instructions in the previous sections.

REFRIGERATOR USE

Using the Controls

The temperature controls are located at the top front of the refrigerator or freezer compartments.

Temperature Controls

For your convenience, the temperature controls are preset at the factory. When you first install your refrigerator, make sure the controls are still set to the recommended setting as shown.

Style 1 - Electronic

Recommended Setting “3 Snowflakes”

Style 2 - Dial

Recommended Setting “3 Snowflakes”

IMPORTANT:

■The recommended setting should be correct for normal household refrigerator use. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.

■Wait 24 hours for your refrigerator to cool completely before adding food. If you add food before the refrigerator has cooled completely, your food may spoil.

NOTE: Adjusting the refrigerator and freezer temperature controls to a colder than recommended setting will not cool the compartments any faster.

■If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked before adjusting the controls.

Adjusting Controls

If you need to adjust the temperature in either the refrigerator or freezer compartment, use the settings listed in the chart below as a guide.

Style 1 - Press the TEMP button to display the desired number of snowflakes from (1 least cold to 4 coldest).

Style 2 - Move the dial to the desired number of snowflakes from (1 least cold to 5 coldest).

NOTE: Except when starting the refrigerator, do not adjust either control more than one setting at a time. Wait 24 hours between adjustments for the temperature to stabilize.

CONDITION/REASON:

ADJUSTMENT:

 

 

REFRIGERATOR too warm

REFRIGERATOR Control

 

one setting higher

 

 

FREEZER too warm/too little ice

FREEZER Control one

 

setting higher

 

 

REFRIGERATOR too cold

REFRIGERATOR Control

 

one setting lower

 

 

FREEZER too cold

FREEZER Control one

 

setting lower

Cooling Off/On

Style 1 - Press and hold TEMP for 3 seconds to turn cooling off. To turn cooling back on, press and hold TEMP again for

3 seconds.

Style 2 - Move the dial control to the word OFF. To turn cooling back on, move the dial control to the desired temperature setting.

NOTE: Neither compartment will cool when the control is set to OFF.

Additional Features

Filters Reset (on some models)

The Filters Reset control allows you to restart the filter status tracking feature each time you replace the air filter or water filter.

■Press and hold FILTERS RESET for 3 seconds. The filter icons will turn off. See “Install Air Filter” and “Water Filtration System.”

10

Page 9 Page 11
Page 10
Image 10
Whirlpool W10343810A Refrigerator USE, Using the Controls, Style 2 Air Filter Status on Electronic Control Display
Page 9 Page 11

W10343810A specifications

The Whirlpool W10343810A is a highly efficient and versatile appliance that reflects the brand's commitment to innovation and quality. As part of Whirlpool's extensive range of home products, this model is specifically designed to enhance your laundry experience, combining advanced technology and user-friendly features for optimal performance.

One of the standout features of the W10343810A is its capacity. With ample space to handle large loads, this model allows users to do fewer laundry batches, saving both time and energy. This is particularly beneficial for families or those who frequently wash bulky items like bedding and towels. The drum is designed for optimal airflow, promoting even drying and minimizing wrinkles, which results in fresh, ready-to-wear clothes straight from the dryer.

The W10343810A is equipped with advanced sensor drying technology. This intelligent feature detects moisture levels in the clothes and automatically adjusts drying time for maximum efficiency. This not only conserves energy but also protects garments from over-drying, ensuring longevity and maintaining fabric integrity. With a variety of drying cycles available, users can select the perfect setting for different fabric types, providing versatility for a range of laundry needs.

Whirlpool has also integrated smart features into the W10343810A, allowing for seamless connectivity. Users can monitor and control their laundry remotely through a mobile app, which makes it easy to keep track of drying cycles and receive alerts when laundry is done. This connectivity offers added convenience for busy households, empowering users to multitask while ensuring their laundry is taken care of.

In terms of design, the W10343810A boasts a modern and sleek look, making it an attractive addition to any laundry room. Its user-friendly interface includes a digital display and intuitive controls, making operation straightforward and hassle-free. The durable construction guarantees reliability, while the easy-to-clean lint filter ensures maintenance is minimal.

Overall, the Whirlpool W10343810A stands out for its combination of capacity, advanced technology, energy efficiency, and user-centric design. It exemplifies Whirlpool's dedication to providing high-quality home appliances that meet the needs of today’s consumers. Whether you’re tackling everyday laundry or special items, the W10343810A is designed to deliver exceptional results.
Top Page Image Contents