Kenwood MD-R2 operation manual Continued, Setting the time, Checking the date and time

(Continued)
ENTER	DELETE/CLEAR
	TIMER
8
DATE
PM
CLOCK
9
DATE
PM
CLOCK
10
DATE
PM
CLOCK
11
DATE
PM
CLOCK

■Setting the time

After step 7, described in the “Setting the date” section

8 Set the “hour” using the jog dial.

●When you turn the jog dial and let go, the hour will change up or down by one. When you turn and hold it, the hour will change continuously.

●The clock uses the 12-hour system. Pay attention to the AM

or PM indicator in the display.

AM 0:00 → midnight, PM 0:00 → noon

9 Press the ENTER button to set the “hour”.

10Adjust the “minute” using the jog dial.

11Press the ENTER button to set the “minute”.

●When the ENTER button is pressed, the clock will show the correct time.

Checking the date and time

After pressing the TIMER button, turn the jog dial until the date and time are displayed.

Resetting the date and time

See “Setting the clock”.

●Once you have set the date and time, “TIME ADJUST” will not be displayed in step 2. Turn the jog dial to make the date and time appear.

●If you do not need to change the settings, just press the ENTER button without turning the jog dial again.

9

MD-R2