Kenwood MD-R2 operation manual To use timer playback -A, To use timer recording -B, Continued

(Continued)

Set the timer so that timer playback or timer recording will begin at the time you want. See the previous page. To use timer playback, perform STEP3-A. To use timer recording, perform STEP3-B.

INPUT	ENTER		DELETE/CLEAR
SELECT
			TIMER
1
(Timer standby mode)
2	TIMER
Timer playback indicator
1
TOTAL	1 2	3
When the digital optical input was selected
2
(Timer standby mode)
3	TIMER REC
Timer recording indicator

■To use timer playback (STEP3-A)

1Insert the MD you want to play, and press the TIMER button. Then select "T-STANDBY" using the jog dial.

2Press the ENTER button.

●The settings will appear in order, and the unit will enter the timer playback standby mode. (The power will be turned off.)

Preparations for any equipment connected to this unit

Any equipment, such as a stereo, that is connected to this unit should be set up in advance as follows:

●Adjust the sound level of the equipment.

●If it has a timer function, set it so that the power will be turned on at the same time as the timer's start time.

●Adjust the playback volume.

■To use timer recording (STEP3-B)

1Insert a recordable MiniDisc, and press the INPUT SELECT button to select the input from which you want to record.

●If you select the analog input, adjust the recording level. (Page 17)

2 Press the TIMER button, and then select "T-STANDBY" using the jog dial.

3 Press the ENTER button.

●The settings will appear in order, and the unit will enter the timer recording standby mode. (The power will be turned off.)

Preparations for any equipment connected to this unit

Any equipment, such as a stereo, that is connected to this unit should be set up in advance as follows:

●Set it up so that music to be recorded will be played at the same time as the timer's start time.

Notes:

●This timer in this unit cannot be used to control equipment connected to this unit. You must use the timer in the other equipment, if it has one.

●The timer playback and timer recording functions cannot be used at the same time.

In the following cases, the timer recording function will not work.

●When a MiniDisc has not been inserted

●When a playback-only MiniDisc is inserted

●When the MiniDisc you inserted is protected against accidental erasure

●When there is no recording space left on the MiniDisc you inserted (when the “TOC FULL” or “DISC FULL” messages appear)

32

MD-R2