Kenwood MD-R2 operation manual To create a track name

(Continued)
		ENTER	DISPLAY/CHARACTER					NAME/TOC EDIT
1
			1	2	3	4	5	6	7
			8	9	10 11		12 13 14
			15 16 17 18
(To name the first track)
2
	TRACK
			1	2	3	4	5	6	7
			8	9	10 11		12 13 14
			15 16 17 18
3
(If you have selected capital letters)
4
	(If you select “L”)
5
	Track name recorded
6
TOC	TRACK
	TOTAL		1	2	3	4	5	6	7
			8	9	10 11		12 13 14
			15 16 17 18
									MD-R2

■To create a track name

Name each track.

A track's name will be displayed whenever you select it and during playback.

1 During playback, press the NAME/TOC EDIT button.

●“TRACK NAME” will appear.

2 Within 10 seconds, press the ENTER button.

●The unit will enter the character input mode.

●The track you are listening to will be played repeatedly.

3 Press the DISPLAY/CHARACTER button to select the type of characters. (Page 26)

4 Select the character you want using the jog dial.

5 Press the ENTER button to enter the character.

●Repeat steps 3 to 5 above to enter characters in the name. When the next character's type is the same as the previous character, step 3 can be skipped.

6 After entering all of the characters in the name, press the NAME/TOC EDIT button.

●The track name will be recorded.

●The unit will return to normal playback.

Notes:

●This function cannot be used while in the program ("PRGM" is lit: Page 13) or random play modes ("RANDOM" is lit: Page 12). First, cancel the program or random play mode before trying to use this function.

●The track name function can be used while in the stop mode (when selecting a track), in the pause mode, or in the record- ing mode. (Select “TRACK NAME” from the edit menu.)

●If you create a track name while recording the track, make sure you finish entering the name before you finish recording the track.

If the end of the recording is reached before you have entered the complete name, only the characters entered before the recording ended will be recorded.

28