Kenwood MD-R2 Music scan play, Connecting headphones, Listening to music through headphones

(Continued)

MUSIC	PROGRAM
SCAN

			1	2		3	4	5		6	7
			8	9	10 11 12 13 14
			15 16 17 18 19 20
	12		4					0dB		OVER
			1	2		3	4	5		6	7
			8	9	10 11 12 13 14
			15 16 17 18 19 20
1
		TOTAL		1	2		3	4	5		6	7
				8	9	10 11 12 13 14
		PRGM	15 16 17 18 19 20

2

3

TRACK

2 3

PRGM

■Music scan play

When the MUSIC SCAN button on the remote control is pressed while in the stop mode, music scan play will start, previewing the tracks from the first to last in order.

●“M.SCAN PLAY” will appear.

To stop music scan play:

Press the ■ button.

To program selected tracks during music scan play: (Music scan program selection)

During music scan play, the current track being previewed can be stored in memory.

1 Press the PROGRAM button.

●“PRGM” will flash.

2 Press the MUSIC SCAN button.

●“M.SCAN PRGM” will appear.

3 Press the PROGRAM button while playing the beginning of a track to be stored in memory.

PHONES

■Connecting headphones

This unit can be used with commercially available headphones. Plug them into the PHONES jack on the front of the unit.

About headphones

Use headphones that have an impedance between 8 ohms and 50 ohms (recommended: 32 ohms).

■Listening to music through headphones

When headphones are connected to the unit and a MiniDisc is played, you can hear the recording.

●It is not necessary to supply power to any other equipment, such as a stereo, which is connected to the unit.

To adjust the headphone volume:

Rotate the PHONE LEVEL control toward MAX to increase the volume, and toward MIN to decrease the volume.

14

MD-R2