(Continued) |
|
|
INPUT | ENTER | DELETE/CLEAR |
SELECT |
| |
|
| TIMER |
(Timer confirmation mode) |
| |
(Timer cancel mode) |
|
|
■To check the timer setting
1 While in the timer standby mode, press the TIMER button.
●If the display shows the wrong mode, correct it using the jog dial.
2 Turn the jog dial until “TIMER CALL” appears.
3 Press the ENTER button within 10 seconds.
●The timer settings will appear in order, and then the original display will reappear.
■To cancel the timer operation
When the power is turned on, the timer will be canceled. The timer operation can also be canceled as follows.
1 While in the timer standby mode, press the TIMER button.
●If the display shows the wrong mode, correct it using the jog dial.
2 Turn the jog dial until “TIMER CANCEL” appears.
3 Press the ENTER button.
●The timer operation will be canceled. ("TIMER" or “TIMER REC” will go out.) The start and stop times will still be stored.
MINIDISC SYSTEM LIMITATIONS
Even if the maximum recording time of a MiniDisc has not | When the number of tracks used reaches the limit, regardless |
been reached, “DISC FULL” or “TOC FULL” may be dis- of the remaining recording time, further recording will be im- | |
played. | possible. (Maximum number of tracks: 255) |
|
|
Even if the number of tracks and the recording time have not | When emphasis information (equalizer treatment in the treble |
reached the limit, “DISC FULL” may be displayed. | section) in a track switches on/off several times, each change |
| is assumed to be the beginning of a new track, which will |
| quickly use up all available track numbers and further record- |
| ing will be impossible, regardless of the remaining recording |
| time or the number of tracks on the original. |
|
|
Even if several short tracks are erased, the remaining record- | When the remaining recording time of a disc is displayed, |
ing time may not show an increase. | short tracks less than 8 seconds long may not be included in |
| the total. |
|
|
Two tracks may not be combined in editing. | For MiniDiscs on which repeated recording and editing opera- |
| tions were performed, the COMBINE function may not work. |
|
|
The total of the recorded time and time remaining on a disc | A cluster (about 2 seconds) is normally the minimum unit of |
may not add up to the maximum possible recording time. | recording. So, even if a track is less than 2 seconds long, it |
| will use about 2 seconds of space on the disc. Therefore, the |
| time actually available for recording may be less than the |
| remaining time displayed. |
| If there are scratches on discs, those sections will be auto- |
| matically avoided (no recording will be placed in those sec- |
| tions). Therefore, the recording time will be reduced. |
|
|
33
