Check Operation of Oven/Broil Burner

1.Open broiler door.

2.Press in and turn the oven control knob to 350°F.

OFF

140

170

200

BROIL

250

350

 

300

450

350

400

 

OVEN TEMP

 

■The oven pilot should now be larger with the flame burning against a small metal bulb.

■The oven burner should light in 20-40 seconds; this delay is normal. The oven valve requires a certain time before it will open and allow gas to flow.

To avoid damaging the hot surface igniter, do not insert any object into the openings of the shield that surrounds the igniter. Do not clean that area.

3.Check the oven burner for proper flame. The flame should be ½" (1.3 cm) long, with inner cone of bluish-green. The outer mantle should be dark blue and should be clean and soft in character. No yellow tips (not enough air), blowing or lifting (too much air) of flame should occur.

If the flame needs adjusting:

1.Turn the oven off. Wait for the oven burner to cool down.

2.Open oven door and remove oven racks, oven tray, and flame spreader and set aside.

A

A

B

C

A. Oven tray (lift up at area shown to remove)

B. Screws

C. Flame spreader

3.Locate the air shutter near the rear wall of oven and loosen the shutter screw.

A

B

A. Shutter screw

B. Air shutter

4.Adjust the air shutter.

5.Turn the oven back on and check for proper flame. If the flame is still not properly adjusted, turn the oven off, wait for the oven burner to cool down and repeat Step 4 until flame is properly adjusted.

6.When the flame has been properly adjusted, turn the oven off and wait for the burner to cool down.

7.Tighten the shutter screw.

8.Reinstall flame spreader and oven tray. Reinstall the oven racks.

9.Close the oven door.

10.Close the broiler door.

Complete Installation

1.Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.

2.Check that you have all of your tools.

3.Dispose of/recycle all packaging materials.

4.Check that the range is level. See the “Level Range” section.

5.Use a mild solution of liquid household cleaner and warm water to remove waxy residue caused by shipping material. Dry thoroughly with a soft cloth. For more information, see the “Range Care” section of the Use and Care Guide.

6.Read the Use and Care Guide.

7.Turn on surface burners and oven. See the Use and Care Guide for specific instruction on range operation.

If range does not operate, check the following:

■Household fuse is intact and tight, or circuit breaker has not tripped.

■Range is plugged into a grounded 3 prong outlet.

■Electrical supply is connected.

■See the “Troubleshooting” section of the Use and Care Guide.

8.When the range has been on for 5 minutes, check for heat. If the range is cold, turn off the range and check that the gas supply line shutoff valve is open.

■If the gas supply line shutoff valve is closed, open it, then repeat the 5-minute test as outlined above.

■If the gas supply line shutoff valve is open, turn to “closed” position and contact a qualified technician.

If you need Assistance or Service:

Please reference the “Assistance or Service” section of the Use and Care Guide or contact the dealer from whom you purchased your range.

11

Page 10 Page 12
Page 11
Image 11
Whirlpool W10477533B Complete Installation, Check Operation of Oven/Broil Burner, If the flame needs adjusting
Page 10 Page 12

W10477533B specifications

The Whirlpool W10477533B is a standout appliance designed to enhance kitchen efficiency and convenience. This model is part of Whirlpool's commitment to creating high-quality home appliances that cater to the diverse needs of modern households.

One of the main features of the Whirlpool W10477533B is its impressive capacity, which allows users to store a significant amount of food and beverages without compromising on space. This is ideal for families and individuals who enjoy cooking and entertaining. The appliance is designed with adjustable shelving, providing flexibility in organization and easy access to items of varying sizes.

In addition to its spacious interior, the W10477533B incorporates advanced cooling technologies. The refrigerator is equipped with the Adaptive Defrost system, which intelligent sensors that optimize energy usage while keeping food fresh. With this technology, the refrigerator effectively monitors the frost buildup, leading to efficient defrosting cycles and minimizing energy consumption.

Another remarkable feature of the Whirlpool W10477533B is its crispers with humidity control. This allows users to keep fruits and vegetables fresher for longer periods by maintaining the ideal humidity levels. The freshness of produce is crucial for reducing food waste and ensuring meals are nutritious and delicious.

The appliance also features a water and ice dispenser, providing easy access to chilled water and ice without the need to open the refrigerator door. This not only saves energy but also adds convenience for users who often need quick access to cool beverages. The easy-to-use controls and intuitive interface enhance the overall user experience, making adjustments simple and straightforward.

In terms of energy efficiency, the Whirlpool W10477533B is designed to meet Energy Star standards, which means it consumes less energy while delivering high performance. This is particularly beneficial for environmentally conscious consumers looking to reduce their carbon footprint while saving on utility bills.

Overall, the Whirlpool W10477533B combines ample storage capacity, advanced cooling technologies, and energy-efficient features to create a refrigerator that meets the demands of contemporary life. It stands out not only for its functionality but also for its stylish design, making it an excellent addition to any modern kitchen. Whether you're an avid cook or simply looking for an efficient way to store groceries, the Whirlpool W10477533B is an appliance that delivers on all fronts.
Top Page Image Contents