White W2500 manual Adjusting, Overedge, Stitch Length, Cutting, Width

ADJUSTING		STITCH
LENGTH
Turn the	stitch length dial until the
required	length	is obtained.	The
higher the number, the longer the
stitch. This dial can adjust the			stitch
length from 1 to 5		mm.

ADJUSTING			CUTTING
OVEREDGE
WIDTH
Overedge	cutting				width can					be
							simply
adjusted from 4 to				7	mm by
									dial
turning overedge			cutting width
according to the kind of						fabric.
It is set at	standard				width of 6				mm
when delivered from					the factory.
Turn it towards		“5”	if fabric edge					curls
while sewing. (Fig.				1)
Turn it towards “7”				if loops hang						off
the edge.	(Fig.	2)

Fig.

1

Fig.

2

Fig.

3

Fig. 4

Stitch finger				(B)
Loops	may hang off the				edge,		when
you sew with		lightweight			fabric		using
3 threads (right needle					only),			and
setting cutting			width dial at 4			- 5		(Fig.
3). In	such a	case		change the			stitch
finger	(A) to	(B) to get neat stitching
(Fig. 4).
Illustration		*		Stitch	length			dial
		*	II:	Overedge		cutting
				width dial
		*	III:	Stitch	finger			(B)

Stitch finger (B) Doigt mailleur (B)

Stitch finger (A) Doigt mailleur (A)