Electric Starter Outlet (If so equipped)

Requires use of a three-prong outdoor extension cord (packed with the snow thrower) and a 120V power source/wall outlet.

Augers

When engaged, the augers rotate and draw snow into the housing.

Chute Assembly

Snow drawn into the auger housing is discharged out the chute assembly.

SECTION 4: OPERATING YOUR SNOW THROWER

Before Starting

WARNING: Read, understand, and follow all instructions and warnings on the machine and in this manual before operating.

Gas & Oil Fill-Up

Service the engine with gasoline and oil as instructed in the separate engine manual packed with your snow thrower. Read instructions carefully.

WARNING: Use extreme care when handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Never fuel the machine indoors or while the engine is hot or running. Extinguish cigarettes, cigars, pipes and other sources of ignition.

Starting The Engine

Attach spark plug wire to spark plug. Make certain the metal loop on the end of the spark plug wire (inside the boot) is fastened securely over the metal tip on the spark plug.

Make certain both the auger control and drive control are in the disengaged (released) position.

Move throttle control up to FAST position. Insert

ignition key into slot. Make sure it snaps into place. Do not attempt to turn the key.

NOTE: The engine cannot start unless the key is inserted into ignition switch.

Electric Starter (on models so quipped)

Determine that your home’s wiring is a three-wire grounded system. Ask a licensed electrician if you are not certain.

CAUTION: If your home’s wiring system

is not a three-wire grounded system, do not use this electric starter under any conditions.

WARNING: The optional electric starter is equipped with a grounded three-wire power cord and plug, and is designed to operate on 120 volt AC household current. It must be used with a properly grounded three-prong receptacle at all times to avoid the possibility of electric shock. Follow all instructions carefully prior to operating the electric starter.

WARNING: If your home electrical

system is grounded, but a three-hole receptacle is not available, do not use your snow thrower’s electric starter.

If you have a grounded three-prong receptacle, proceed as follows:

Plug the extension cord into the outlet located on the engine’s surface. Plug the other end of extension cord into a three-prong 120-volt, grounded, AC outlet in a well-ventilated area.

Rotate choke control to FULL choke position (cold engine start).

NOTE: If the engine is already warm, place choke control in the OFF position instead of FULL.

Push the primer two or three times for cold engine start, making sure to cover vent hole in the center of the primer when pushing.

NOTE: DO NOT use primer to restart a warm engine after a short shutdown.

Push starter button to start engine.

Once the engine starts, immediately release starter button.

As the engine warms, slowly rotate the choke control to the OFF position. If the engine falters, quickly rotate the choke control back to FULL and then slowly into the OFF position again.

When disconnecting the extension cord, always unplug the end at the three-prong wall outlet before unplugging the opposite end from the snow thrower.

Recoil Starter

Rotate choke control to FULL choke position (cold engine start).

10

Page 10
Image 10
White Outdoor 772C0715 manual Operating Your Snow Thrower

772C0715 specifications

The White Outdoor 772C0715 is a notable powerhouse in the realm of outdoor lawn equipment, specifically designed for those who seek efficiency and convenience in their gardening tasks. Built with robust engineering and user-friendly features, this model stands out in the market.

One of the core aspects that define the White Outdoor 772C0715 is its powerful engine. It typically comes equipped with a reliable gas engine that delivers smooth operation and ample power to handle a variety of yard maintenance tasks. The engine's design focuses on providing exceptional torque, allowing users to tackle thick grass and challenging terrain without sacrificing performance.

The cutting deck on the 772C0715 is designed for precision and efficiency. Featuring a wide cutting path, it ensures that the user can cover large areas in a short amount of time. This model often incorporates adjustable cutting heights, which enables users to customize their mowing experience according to the specific needs of their lawn. Whether it’s a manicured garden or a more rugged area, the versatility in cutting height helps achieve the desired results.

Another significant feature is its user-friendly controls. The 772C0715 often integrates intuitive controls that allow users, regardless of their experience level, to operate the machine with ease. Simple functions for starting, stopping, and adjusting settings can significantly enhance the overall mowing experience.

Moreover, the design of the 772C0715 emphasizes comfort during operation. Many models come with ergonomic handles that reduce strain on the operator, especially during prolonged use. The lightweight construction further aids in maneuverability, allowing users to navigate around obstacles without difficulty.

The White Outdoor 772C0715 also showcases advanced durability through its construction materials. Engineered to withstand the test of time, its components resist wear and tear, making it a sound investment for homeowners and professional landscapers alike.

In sum, the White Outdoor 772C0715 encapsulates practicality and performance in lawn care. With a powerful engine, adjustable cutting deck, user-friendly controls, and durable construction, it is designed to meet the demands of various gardening tasks while providing comfort and ease of use for every operator. Whether you are a seasoned gardener or just starting, the 772C0715 proves to be a valuable addition to any outdoor tool collection.