SECTION 1: IMPORTANT SAFE OPERATION PRACTICES

WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol—heed its warning.

WARNING: Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to State of California to cause cancer and birth defects or other reproductive harm.

DANGER: This machine was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

Training

1.Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

2.Be familiar with all controls and their proper operation. Know how to stop the machine and disengage them quickly.

3.Never allow children under 14 years old to operate this machine. Children 14 years old and over should read and understand the operation instructions and safety rules in this manual and should be trained and supervised by a parent.

4.Never allow adults to operate this machine without proper instruction.

5.Thrown objects can cause serious personal injury. Plan your snow throwing pattern to avoid discharge of material toward roads, bystanders and the like.

6.Keep bystanders, helpers, pets and children at least 75 feet from the machine while it is in operation. Stop machine if anyone enters the area.

7.Exercise caution to avoid slipping or falling, especially when operating in reverse.

Preparation

1.Thoroughly inspect the area where the equipment is to be used. Remove all door mats, newspapers, sleds, boards, wires and other foreign objects which could be tripped over or thrown by the auger/impeller.

2.Always wear safety glasses or eye shields during operation and while performing an adjustment or repair to protect your eyes. Thrown objects which ricochet can cause serious injury to the eyes.

3.Do not operate without wearing adequate winter outer garments. Do not wear jewelry, long scarves or other loose clothing which could become entangled in moving parts. Wear footwear which will improve footing on slippery surfaces.

4.Use a grounded extension cord and receptacle for all units with electric start engines.

5.Adjust collector housing height to clear gravel or crushed rock surfaces.

6.Disengage the control handle before starting the engine.

7.Never attempt to make any adjustments while engine is running, except where specifically recommended in the operator’s manual.

8.Let engine and machine adjust to outdoor temperature before starting to clear snow.

9.To avoid personal injury or property damage use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes which can ignite. Wash your skin and change clothes immediately.

a.Use only an approved gasoline container.

b.Extinguish all cigarettes, cigars, pipes and other sources of ignition.

c.Never fuel machine indoors.

d.Never remove gas cap or add fuel while the engine is hot or running.

e.Allow engine to cool at least two minutes before refueling.

f.Never over fill fuel tank. Fill tank to no more than ½ inch below bottom of filler neck to provide space for fuel expansion.

g.Replace gasoline cap and tighten securely.

h.If gasoline is spilled, wipe it off the engine and equipment. Move machine to another area. Wait 5 minutes before starting the engine.

i.Never store the machine or fuel container inside where there is an open flame, spark or pilot light (e.g. furnace, water heater, space heater, clothes dryer etc.).

j.Allow machine to cool at least 5 minutes before storing.

Operation

1.Do not put hands or feet near rotating parts, in the auger housing or discharge chute. Contact with the rotating parts can amputate hands and feet.

2.The auger control handle is a safety device. Never bypass its operation. Doing so, makes the machine unsafe and may cause personal injury.

3.The control handle must operate easily in both directions and automatically return to the disengaged position when released.

4.Never operate with a missing or damaged discharge chute. Keep all safety devices in place and working.

5.Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

6.Do not operate machine while under the influence of alcohol or drugs.

3

Page 3
Image 3
White Outdoor 772C0715 manual Important Safe Operation Practices, Training

772C0715 specifications

The White Outdoor 772C0715 is a notable powerhouse in the realm of outdoor lawn equipment, specifically designed for those who seek efficiency and convenience in their gardening tasks. Built with robust engineering and user-friendly features, this model stands out in the market.

One of the core aspects that define the White Outdoor 772C0715 is its powerful engine. It typically comes equipped with a reliable gas engine that delivers smooth operation and ample power to handle a variety of yard maintenance tasks. The engine's design focuses on providing exceptional torque, allowing users to tackle thick grass and challenging terrain without sacrificing performance.

The cutting deck on the 772C0715 is designed for precision and efficiency. Featuring a wide cutting path, it ensures that the user can cover large areas in a short amount of time. This model often incorporates adjustable cutting heights, which enables users to customize their mowing experience according to the specific needs of their lawn. Whether it’s a manicured garden or a more rugged area, the versatility in cutting height helps achieve the desired results.

Another significant feature is its user-friendly controls. The 772C0715 often integrates intuitive controls that allow users, regardless of their experience level, to operate the machine with ease. Simple functions for starting, stopping, and adjusting settings can significantly enhance the overall mowing experience.

Moreover, the design of the 772C0715 emphasizes comfort during operation. Many models come with ergonomic handles that reduce strain on the operator, especially during prolonged use. The lightweight construction further aids in maneuverability, allowing users to navigate around obstacles without difficulty.

The White Outdoor 772C0715 also showcases advanced durability through its construction materials. Engineered to withstand the test of time, its components resist wear and tear, making it a sound investment for homeowners and professional landscapers alike.

In sum, the White Outdoor 772C0715 encapsulates practicality and performance in lawn care. With a powerful engine, adjustable cutting deck, user-friendly controls, and durable construction, it is designed to meet the demands of various gardening tasks while providing comfort and ease of use for every operator. Whether you are a seasoned gardener or just starting, the 772C0715 proves to be a valuable addition to any outdoor tool collection.