Nortel Networks Installing the BCM1000 on a flat surface, Replacing your BCM1000 hardware

76Chapter 5 Installing the BCM1000

Installing the BCM1000 on a flat surface

You can install the BCM1000 on any flat surface that can support the weight of the unit.

Caution: Refer to “Environment checklist” on page 67 for acceptable environmental conditions before selecting a location for the BCM1000.

To install the BCM1000 on a table or shelf:

1Attach four rubber feet to the corners on the bottom of the base unit.

2Position the BCM1000 on the table or shelf. Make sure you leave enough space around the unit for ventilation and for access to the power and system cables and to the media bay modules.

Replacing your BCM1000 hardware

If you need to replace your BCM1000, which would be the case if the motherboard or MSC became inoperable, you will need to regenerate all your keycodes to reflect the new system identification, and enter them again after you perform your system data restore. Refer to the Business Communications Manager Programming Operations Guide for a description of performing a data restore from your BRU backup disks.

P0609324 01