Nortel Networks BCM1000 manual Auxiliary equipment

50 Chapter 2 Telephony hardware

Auxiliary equipment

•BST doorphone — BCM 3.5 software introduced support for the Business Series Terminal Doorphone, an alerting/page unit that can be installed outside secure doors. The device allows a caller to ring or page an internal telephone. If the door has electronic door opening equipment, the person who answers the page can activate the door unlock.

Accessories

•Station auxiliary power supply (SAPS) — provides power for the Business Communications Manager central answering position (CAP) module. Can also be used to extend the loop length between a telephone or terminal and the Business Communications Manager hardware from 1,000 to 2,600 feet. You must use a dedicated cable to connect the two locations.

Legacy equipment

•Audio Conference Unit (ACU)— provides large-room audio conferencing. The keypad provides many of the set features of the basic Norstar M-series telephones without display or memory buttons. This set comes with three microphones. Installation instructions are provided by the vendor.

•Analog Terminal Adapter 2 (ATA 2) — converts digital signals to analog signals to allow communication with analog devices such as FAX machines, modems and answering machines. The ATA 2 supports a maximum transmission rate of 28.8 kbit/s. With a single line telephone, the ATA 2 supports a long loop configuration. For more information, refer to Chapter 12, “Installing Analog Terminal Adapters,” on page 149.

•Norstar M7324 — two-line display with three display buttons, 24 memory buttons with indicators. Options: two CAP modules.

•Central answering position (CAP) (North American systems only) — connects to an M7324 telephone and provides 48 additional memory buttons. You need one Station Auxiliary Power Supply (SAPS) for every M7324 telephone that has CAP modules.

•Norstar M7324N (UK and Australia only) — same features.

•Central answering position (CAPN) (UK and Australia only) — same features, connects to M7324N telephones

Note: There is no Business Series Terminal equivalent to the M7324 telephones.

•Norstar M7100 — one-line display, one memory button, without indicator.

•Norstar M7100N (UK and Australia only) — same features

•Norstar M7208 — one-line display, eight memory buttons with indicators.

•Norstar M7208N (UK and Australia only) same features

•Norstar M7310 — two-line display with three display buttons, 10 memory buttons with indicators, 12 dual memory buttons without indicators.

•Norstar M7310N (UK/Australia only) — same features

P0609324 01